EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering

Vail Baumer, Erin Gunn, Valerie Riegle, Claire Bailey, Clayton Shonkwiler iD, David Prawel iD

Journal of Functional Biomaterials · 30.04.2023 · 14 (5) · 251

DOI: 10.3390/jfb14050251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 30.04.2023. Verfasst von Vail Baumer und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIH HHS, National Institutes of Health, National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS), Colorado State University Translational Medicine Institute Translational Acceleration Program (TMI TAP).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triply Periodic Minimal Surfaces (TPMS) are promising structures for bone tissue engineering scaffolds due to their relatively high mechanical energy absorption, smoothly interconnected porous structure, scalable unit cell topology, and relatively high surface area per volume. Calcium phosphate-based materials, such as hydroxyapatite and tricalcium phosphate, are very popular scaffold biomaterials due to their biocompatibility, bioactivity, compositional similarities to bone mineral, non-immunogenicity, and tunable biodegradation. Their brittle nature can be partially mitigated by 3D printing them in TPMS topologies such as gyroids, which are widely studied for bone regeneration, as evidenced by their presence in popular 3D-printing slicers, modeling systems, and topology optimization tools. Although structural and flow simulations have predicted promising properties of other TPMS scaffolds, such as Fischer–Koch S (FKS), to the best of our knowledge, no one has explored these possibilities for bone regeneration in the laboratory. One reason for this is that fabrication of the FKS scaffolds, such as by 3D printing, is challenged by a lack of algorithms to model and slice this topology for use by low-cost biomaterial printers. This paper presents an open-source software algorithm that we developed to create 3D-printable FKS and gyroid scaffold cubes, with a framework that can accept any continuous differentiable implicit function. We also report on our successful 3D printing of hydroxyapatite FKS scaffolds using a low-cost method that combines robocasting with layer-wise photopolymerization. Dimensional accuracy, internal microstructure, and porosity characteristics are also presented, demonstrating promising potential for the 3D printing of TPMS ceramic scaffolds for bone regeneration.

Schlagwörter

Stichwörter der Autor:innen

3D printingFischer-KochTPMSceramicsgyroidhydroxyapatitephotocastingrobocastingscaffoldtissue engineeringtricalcium phosphate

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA.
  • Department of Computer Science, Colorado State University, Fort Collins, CO 80523, USA.
  • School of Biomedical Engineering, Colorado State University, Fort Collins, CO 80523, USA.
  • Department of Mathematics, Colorado State University, Fort Collins, CO 80523, USA.

ORCID-Profile: Clayton Shonkwiler, David Prawel

Förderung

  • NIH HHS
  • National Institutes of Health, National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS)
  • Colorado State University Translational Medicine Institute Translational Acceleration Program (TMI TAP)
  • Simons Foundation

Zitieren

APA

Baumer, V., Gunn, E., Riegle, V., Bailey, C., Shonkwiler, C., & Prawel, D. (2023). Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering. Journal of Functional Biomaterials, 14(5), 251. https://doi.org/10.3390/jfb14050251

Vancouver

Baumer V, Gunn E, Riegle V, Bailey C, Shonkwiler C, Prawel D. Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering. Journal of Functional Biomaterials. 2023;14(5):251. doi:10.3390/jfb14050251

BibTeX
@article{Baumer2023,
  author = {Baumer, Vail and Gunn, Erin and Riegle, Valerie and Bailey, Claire and Shonkwiler, Clayton and Prawel, David},
  title = {Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering},
  journal = {Journal of Functional Biomaterials},
  year = {2023},
  volume = {14},
  number = {5},
  pages = {251},
  doi = {10.3390/jfb14050251}
}
Kostenlos starten →