EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Enamel Surfaces after Different Techniques of Interproximal Enamel Reduction

Francesca Silvestrini Biavati, Viola Schiaffino, Antonio Signore, Nicola De Angelis iD, Valentina Lanteri iD, Alessandro Ugolini iD

Journal of Functional Biomaterials · 16.02.2023 · 14 (2) · 110

DOI: 10.3390/jfb14020110 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 16.02.2023. Verfasst von Francesca Silvestrini Biavati und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Surgical and Integrated Diagnostic Sciences, University of Genova, 16132 Genoa, Italy. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

According to the literature, interproximal enamel reduction (IER) has become a consolidated technique used in orthodontic treatments to gain space in particular situations such as dental crowding, non-extractive therapies, tooth-size discrepancies, and prevention of dental relapse. There are different methods to realize stripping, and enamel surfaces resulting after this procedure can be analyzed with SEM. The aim of this study was to analyze how different devices of IER leave the surface of the teeth. One hundred and sixty freshly extracted, intact human lower incisors were included in the study, fixed in a plaster support, and then processed with four different techniques of enamel reduction and finishing. Then, they were divided randomly into eight groups (A1–A2, B1–B2, C1–C2, D, and E), each containing twenty teeth. The A, B, and C groups were divided into two subgroups and then all the teeth were observed at SEM. Each digital image acquired by SEM showed that there were streaks on the surfaces, due to the cutter used. The results of this study showed that only group C2 (tungsten carbide bur followed by twelve steps of medium–fine–ultrafine 3M Soft Lex disks) has a few line, which is very similar to group E (untreated group), while the other groups have a lot of lines and show a rougher final surface.

Schlagwörter

Stichwörter der Autor:innen

crowdingenamel roughnessinterproximal enamel reductionorthodonticsstripping

Autor:innen und Institutionen

  • Department of Surgical and Integrated Diagnostic Sciences, University of Genova, 16132 Genoa, Italy.
  • Therapeutic Dentistry Department, Institute of Dentistry, I.M. Sechenov First Moscow State Medical University, Trubetskaya Str., 119992 Moscow, Russia.
  • Dental Department, University Trisakti, Jakarta 11440, Indonesia.
  • Department of Biomedical Surgical and Dental Sciences, University of Milan, 20142 Milan, Italy.

ORCID-Profile: Nicola De Angelis, Valentina Lanteri, Alessandro Ugolini

Zitieren

APA

Silvestrini Biavati, F., Schiaffino, V., Signore, A., De Angelis, N., Lanteri, V., & Ugolini, A. (2023). Evaluation of Enamel Surfaces after Different Techniques of Interproximal Enamel Reduction. Journal of Functional Biomaterials, 14(2), 110. https://doi.org/10.3390/jfb14020110

Vancouver

Silvestrini Biavati F, Schiaffino V, Signore A, De Angelis N, Lanteri V, Ugolini A. Evaluation of Enamel Surfaces after Different Techniques of Interproximal Enamel Reduction. Journal of Functional Biomaterials. 2023;14(2):110. doi:10.3390/jfb14020110

BibTeX
@article{SilvestriniBiavati2023,
  author = {Silvestrini Biavati, Francesca and Schiaffino, Viola and Signore, Antonio and De Angelis, Nicola and Lanteri, Valentina and Ugolini, Alessandro},
  title = {Evaluation of Enamel Surfaces after Different Techniques of Interproximal Enamel Reduction},
  journal = {Journal of Functional Biomaterials},
  year = {2023},
  volume = {14},
  number = {2},
  pages = {110},
  doi = {10.3390/jfb14020110}
}
Kostenlos starten →