EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Sensor Accuracy and Model Calibration on Simulation of Heat Pumps with Refrigerant Leakage Faults

Francesco Pelella, Adelso Flaviano Passarelli, Raffaele Cilento, Belén Llopis-Mengual, Luca Viscito, Emilio Navarro-Peris, Alfonso William Mauro

Journal of Experimental and Theoretical Analyses · 14.05.2026 · 4 (2) · 18

DOI: 10.3390/jeta4020018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Experimental and Theoretical Analyses, online erschienen am 14.05.2026. Verfasst von Francesco Pelella und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Innovation Council, Italian Ministry of University and Research, European Union.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Soft operational faults can noticeably degrade the performance of heat pumps and influence key monitored variables, emphasizing the need for reliable Fault Detection, Diagnosis, and Evaluation (FDDE) strategies. The BEYOND project tackles this challenge by analyzing simultaneous soft faults using a calibrated simulation model informed by data from a dedicated test rig. Achieving reliable results depends on both accurate measurements and proper model calibration. However, sensor uncertainty and errors in sub-models and correlations calibration can compromise model reliability. This work investigates the influence of measurement accuracy and calibration quality on both experimental variables and simulation outcomes for a residential air-to-water heat pump operating in cooling mode, with particular focus on refrigerant charge estimation. Two sensor configurations—“low accuracy” and “high accuracy”—are assessed, representing commercial- and laboratory-grade instruments, respectively, along with two corresponding calibration strategies. In the low-accuracy case, uncertainties around 10% were found for cooling capacity, energy efficiency ratio, and refrigerant mass flow rate, whereas high-accuracy setups reduced these to approximately 3%. Ultimately, the comparison between experimental and model-derived uncertainties confirms that achieving reliable predictions requires a balanced investment in both high-quality instrumentation and careful model calibration. Overall, this study serves as a crucial tool during the preliminary design of an experimental setup, assisting in the selection of a sensor suite that ensures not only the reliability of secondary variables and KPIs but also a robust and accurate calibration of physics-based models using the acquired experimental data.

Förderung

  • European Innovation Council
  • Italian Ministry of University and Research
  • European Union

Zitieren

APA

Pelella, F., Passarelli, A. F., Cilento, R., Llopis-Mengual, B., Viscito, L., Navarro-Peris, E., & Mauro, A. W. (2026). Impact of Sensor Accuracy and Model Calibration on Simulation of Heat Pumps with Refrigerant Leakage Faults. Journal of Experimental and Theoretical Analyses, 4(2), 18. https://doi.org/10.3390/jeta4020018

Vancouver

Pelella F, Passarelli AF, Cilento R, Llopis-Mengual B, Viscito L, Navarro-Peris E, et al. Impact of Sensor Accuracy and Model Calibration on Simulation of Heat Pumps with Refrigerant Leakage Faults. Journal of Experimental and Theoretical Analyses. 2026;4(2):18. doi:10.3390/jeta4020018

BibTeX
@article{Pelella2026,
  author = {Pelella, Francesco and Passarelli, Adelso Flaviano and Cilento, Raffaele and Llopis-Mengual, Belén and Viscito, Luca and Navarro-Peris, Emilio and Mauro, Alfonso William},
  title = {Impact of Sensor Accuracy and Model Calibration on Simulation of Heat Pumps with Refrigerant Leakage Faults},
  journal = {Journal of Experimental and Theoretical Analyses},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {18},
  doi = {10.3390/jeta4020018}
}
Kostenlos starten →