High-Frequency Flow Rate Determination—A Pressure-Based Measurement Approach
Journal of Experimental and Theoretical Analyses · 12.02.2025 · 3 (1) · 5
DOI: 10.3390/jeta3010005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Experimental and Theoretical Analyses, online erschienen am 12.02.2025. Verfasst von Faras Brumand-Poor und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Forschungskuratorium Maschinenbau e. V. (FKM), Federal Ministry of Economic Affairs and Climate Action through the AiF.
Abstract (Originalsprache)
Accurate flow measurement is critical for hydraulic systems because it represents a crucial parameter in the control of fluid power systems and enables the calculation of hydraulic power when combined with pressure data, which is valuable for applications such as predictive maintenance. Existing flow sensors in fluid power systems typically operate invasively, disturbing the flow and providing inaccurate results, especially under transient conditions. A conventional method involves calculating the flow rate using the pressure difference along a pipe via the Hagen–Poiseuille law, which is limited to steady, laminar, incompressible flow. This paper presents a novel soft sensor with an analytical model for transient pipe flow based on two pressure signals, thus eliminating the need for an actual volumetric flow sensor. The soft sensor was derived in previous research and validated with a distributed parameter simulation. This work uses a constructed test rig to validate the soft sensor with real-world experiments. The results highlight the potential of the soft sensor to accurately and computationally efficiently measure transient pipe volumetric flow based on two pressure signals.
Förderung
- Forschungskuratorium Maschinenbau e. V. (FKM)
- Federal Ministry of Economic Affairs and Climate Action through the AiF
Zitieren
APA
Brumand-Poor, F., Kotte, T., Schüpfer, M., Figge, F., & Schmitz, K. (2025). High-Frequency Flow Rate Determination—A Pressure-Based Measurement Approach. Journal of Experimental and Theoretical Analyses, 3(1), 5. https://doi.org/10.3390/jeta3010005
Vancouver
Brumand-Poor F, Kotte T, Schüpfer M, Figge F, Schmitz K. High-Frequency Flow Rate Determination—A Pressure-Based Measurement Approach. Journal of Experimental and Theoretical Analyses. 2025;3(1):5. doi:10.3390/jeta3010005
BibTeX
@article{BrumandPoor2025,
author = {Brumand-Poor, Faras and Kotte, Tim and Schüpfer, Marwin and Figge, Felix and Schmitz, Katharina},
title = {High-Frequency Flow Rate Determination—A Pressure-Based Measurement Approach},
journal = {Journal of Experimental and Theoretical Analyses},
year = {2025},
volume = {3},
number = {1},
pages = {5},
doi = {10.3390/jeta3010005}
}
EUVIMED