EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Implementation of Composite Materials for Lightweighting of Industrial Vehicle Chassis

Ivan Tomasi, Stefano Grandi, Giorgio Donzella, Luigi Solazzi

Journal of Composites Science · 05.11.2025 · 9 (11) · 611

DOI: 10.3390/jcs9110611 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 05.11.2025. Verfasst von Ivan Tomasi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union-NextGenerationEU, National Sustainable Mobility Center, Italian Ministry of University and Research Decree.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research study investigates the use of composite materials to reduce the weight of heavy industrial vehicle chassis. A new Carbon Fibre Reinforced Polymer (CFRP) crossmember was developed to replicate the mechanical performance of the traditional steel component while achieving substantial weight reduction. A multi-step approach was adopted: analytical and finite-element analyses were performed on single crossmembers to assess bending and torsional stiffness. The CFRP design achieved increases of 6.8% in torsional stiffness and 5.0% in bending stiffness, with a 68.1% weight reduction. After confirming stiffness equivalence, full chassis simulations were carried out to evaluate global performance. The steel model reproduced experimental results with a relative error of 1.13%, while the CFRP configuration enhanced overall torsional stiffness by 7.8%. Extending these results to all crossmembers, the initial cost increase of the CFRP solution could be recovered within about 2 years for the diesel scenario and 3.5 years for the electric one. Environmental benefits were also quantified, with annual CO2 reductions of 708.4 kg and 298.6 kg, and cost savings of up to 463.3 EUR/year and 299.8 EUR/year, respectively.

Förderung

  • European Union-NextGenerationEU
  • National Sustainable Mobility Center
  • Italian Ministry of University and Research Decree
  • Spoke 11-Innovative Materials and Lightweighting

Zitieren

APA

Tomasi, I., Grandi, S., Donzella, G., & Solazzi, L. (2025). Implementation of Composite Materials for Lightweighting of Industrial Vehicle Chassis. Journal of Composites Science, 9(11), 611. https://doi.org/10.3390/jcs9110611

Vancouver

Tomasi I, Grandi S, Donzella G, Solazzi L. Implementation of Composite Materials for Lightweighting of Industrial Vehicle Chassis. Journal of Composites Science. 2025;9(11):611. doi:10.3390/jcs9110611

BibTeX
@article{Tomasi2025,
  author = {Tomasi, Ivan and Grandi, Stefano and Donzella, Giorgio and Solazzi, Luigi},
  title = {Implementation of Composite Materials for Lightweighting of Industrial Vehicle Chassis},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {11},
  pages = {611},
  doi = {10.3390/jcs9110611}
}
Kostenlos starten →