EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Raffia Fiber Fabric (Raphia vinifera)-Reinforced Epoxy Matrix Composites

Douglas Santos Silva, Leticia dos Santos Aguilera, Raí Felipe Pereira Junio, Sergio Neves Monteiro, Marcelo Henrique Prado da Silva

Journal of Composites Science · 18.09.2025 · 9 (9) · 504

DOI: 10.3390/jcs9090504 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 18.09.2025. Verfasst von Douglas Santos Silva und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordination of Superior Level Staff Improvement—Brasil (CAPES).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demand for lightweight materials with high mechanical performance has driven the development of polymer matrix composites reinforced with natural lignocellulosic fibers (NLFs). This study evaluates epoxy composites reinforced with raffia fabric (Raphia vinifera) at volumetric contents of 10% (ER10), 20% (ER20), and 30% (ER30). Mechanical characterization included tensile, flexural, and Charpy impact tests. Tensile results showed that ER10 and ER30 reached similar strengths (29.96 ± 3.77 MPa and 29.84 ± 4.00 MPa), while ER20 had lower values (23.54 ± 7.94 MPa). However, ER30 exhibited a significantly higher tensile force (2024.54 ± 136.75 N). ER10 displayed the highest tensile modulus (5.64 ± 2.31 GPa), indicating greater stiffness. Flexural tests revealed that ER10 achieved the best flexural strength (36.28 ± 8.87 MPa) and modulus (3.10 ± 0.96 GPa), while ER20 reached the highest maximum force (28.88 ± 10.40 N). Impact tests demonstrated improved energy absorption with increasing fiber content: ER10 (2.08 ± 0.22 J), ER20 (3.57 ± 0.36 J), and ER30 absorbed the full impact energy (5.387 J) without failure. Morphological analysis identified fiber pull-out and delamination as key failure mechanisms. The results demonstrate the viability of raffia fabric as a sustainable reinforcement for epoxy composites with enhanced impact resistance.

Förderung

  • Coordination of Superior Level Staff Improvement—Brasil (CAPES)

Zitieren

APA

Silva, D. S., Aguilera, L. D. S., Junio, R. F. P., Monteiro, S. N., & Silva, M. H. P. D. (2025). Mechanical Properties of Raffia Fiber Fabric (Raphia vinifera)-Reinforced Epoxy Matrix Composites. Journal of Composites Science, 9(9), 504. https://doi.org/10.3390/jcs9090504

Vancouver

Silva DS, Aguilera LDS, Junio RFP, Monteiro SN, Silva MHPD. Mechanical Properties of Raffia Fiber Fabric (Raphia vinifera)-Reinforced Epoxy Matrix Composites. Journal of Composites Science. 2025;9(9):504. doi:10.3390/jcs9090504

BibTeX
@article{Silva2025,
  author = {Silva, Douglas Santos and Aguilera, Leticia dos Santos and Junio, Raí Felipe Pereira and Monteiro, Sergio Neves and Silva, Marcelo Henrique Prado da},
  title = {Mechanical Properties of Raffia Fiber Fabric (Raphia vinifera)-Reinforced Epoxy Matrix Composites},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {9},
  pages = {504},
  doi = {10.3390/jcs9090504}
}
Kostenlos starten →