EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Tribological Behavior of Polyimide Composites with Dual-Phase MoS2/MXene Lubricants: A Synergistic Effect Analysis

Xingtian Ji, Pengwei Ren, Hao Liu, Yanhua Shi, Yunfeng Yan, Jianzhang Wang

Journal of Composites Science · 17.07.2025 · 9 (7) · 373

DOI: 10.3390/jcs9070373 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 17.07.2025. Verfasst von Xingtian Ji und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Technical foundation projects of Taihang National Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyimide (PI), owing to its high heat resistance and low density, is often employed as a substitute for metallic materials in high-temperature environments, such as aircraft engines, bearings, and gears. However, the relatively high friction coefficient of pure PI limits its application under harsh conditions. Therefore, this study synthesized a composite lubricant with binary fillers to improve this performance. This study employed the hydrothermal method to synthesize MoS2/MXene composite lubricating fillers and systematically investigated the high-temperature tribological properties of PI composites reinforced with these fillers. The results demonstrated that the optimal PI composite containing 5% MoS2/MXene exhibited a 14 °C increase in initial decomposition temperature compared to pure PI. Additionally, its thermal conductivity was enhanced by 36%, while the hardness (0.398 GPa) and elastic modulus (6.294 GPa) were elevated by 12.4% and 18.6%, respectively, relative to the pure PI. In terms of tribological behavior, all composite formulations displayed typical temperature-dependent friction characteristics. It is worth noting that MXene’s high hardness and thermal conductivity inhibited the occurrence of abrasive wear. At the same time, the substrate was strengthened, and thermal resistance was enhanced, thereby delaying the plastic deformation of the material at high temperatures.

Förderung

  • National Natural Science Foundation of China
  • Technical foundation projects of Taihang National Laboratory

Zitieren

APA

Ji, X., Ren, P., Liu, H., Shi, Y., Yan, Y., & Wang, J. (2025). High-Temperature Tribological Behavior of Polyimide Composites with Dual-Phase MoS2/MXene Lubricants: A Synergistic Effect Analysis. Journal of Composites Science, 9(7), 373. https://doi.org/10.3390/jcs9070373

Vancouver

Ji X, Ren P, Liu H, Shi Y, Yan Y, Wang J. High-Temperature Tribological Behavior of Polyimide Composites with Dual-Phase MoS2/MXene Lubricants: A Synergistic Effect Analysis. Journal of Composites Science. 2025;9(7):373. doi:10.3390/jcs9070373

BibTeX
@article{Ji2025,
  author = {Ji, Xingtian and Ren, Pengwei and Liu, Hao and Shi, Yanhua and Yan, Yunfeng and Wang, Jianzhang},
  title = {High-Temperature Tribological Behavior of Polyimide Composites with Dual-Phase MoS2/MXene Lubricants: A Synergistic Effect Analysis},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {7},
  pages = {373},
  doi = {10.3390/jcs9070373}
}
Kostenlos starten →