EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing the Interfacial Adhesion and Mechanical Strength of Pultruded ECR–Glass Fiber Composites with Nanofiller-Infused Epoxy Resin

Poorna Chandra, Ravikumar Venkatarayappa, Savitha D. Chandrashekar, Kiran Raveendra, Asha P. Bhaskararao, Suresha Bheemappa, Dayanand M. Goudar, Rajashekhar V. Kurhatti, K. Raju, Deesy G. Pinto

Journal of Composites Science · 23.06.2025 · 9 (7) · 321

DOI: 10.3390/jcs9070321 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 23.06.2025. Verfasst von Poorna Chandra und 9 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia, IP/MCTES through national funds (PIDDAC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of the interaction between silica (nS) and hydroxyapatite (nHap) nanomaterials on the characteristics of unidirectional glass-fiber-reinforced epoxy (GF/Ep) composite systems is investigated in this work. The goal of the study is to use these nanofillers to improve the microstructure and mechanical characteristics. Pultrusion was used to produce hybrid nanocomposites while keeping the GF loading at a consistent 75% by weight. The hybrid nanocomposites were made with a total filler loading of 6 wt.%, including nHap, and a nS loading ranging from 2 to 4 wt.%. The mechanical performance of the composite was greatly improved by the use of these nanofillers. Compared to neat GF/Ep, hybrid nanocomposites with 6 wt.% combined fillers exhibited increased hardness (14%), tensile strength (25%), interlaminar shear strength (21.3%), and flexural strength (33%). These improvements are attributed to efficient filler dispersion, enhanced fiber-matrix adhesion, and crack propagation resistance. Incorporating 4 wt.% nS alone improved hardness (6%), tensile strength (9%), tensile modulus (21%), interlaminar shear strength (11.4%), flexural strength (12%), and flexural modulus (14%). FTIR analysis indicated Si-O-Si network formation and increased hydrogen bonding, supporting enhanced interfacial interactions. Ultraviolet reflectance measurements showed increased UV reflectivity with nS, especially in hybrid systems, due to synergistic effects. Impact strength also improved, with a notable 11.6% increase observed in the hybrid nanocomposite. Scanning and transmission electron microscopy confirmed that the nanofillers act as secondary reinforcements within the matrix. These hybrid nanocomposites present a promising material choice for various industries, including marine structural applications and automotive components.

Förderung

  • Fundação para a Ciência e a Tecnologia, IP/MCTES through national funds (PIDDAC)

Zitieren

APA

Chandra, P., Venkatarayappa, R., Chandrashekar, S. D., Raveendra, K., Bhaskararao, A. P., Bheemappa, S., Goudar, D. M., Kurhatti, R. V., Raju, K., & Pinto, D. G. (2025). Enhancing the Interfacial Adhesion and Mechanical Strength of Pultruded ECR–Glass Fiber Composites with Nanofiller-Infused Epoxy Resin. Journal of Composites Science, 9(7), 321. https://doi.org/10.3390/jcs9070321

Vancouver

Chandra P, Venkatarayappa R, Chandrashekar SD, Raveendra K, Bhaskararao AP, Bheemappa S, et al. Enhancing the Interfacial Adhesion and Mechanical Strength of Pultruded ECR–Glass Fiber Composites with Nanofiller-Infused Epoxy Resin. Journal of Composites Science. 2025;9(7):321. doi:10.3390/jcs9070321

BibTeX
@article{Chandra2025,
  author = {Chandra, Poorna and Venkatarayappa, Ravikumar and Chandrashekar, Savitha D. and Raveendra, Kiran and Bhaskararao, Asha P. and Bheemappa, Suresha and Goudar, Dayanand M. and Kurhatti, Rajashekhar V. and Raju, K. and Pinto, Deesy G.},
  title = {Enhancing the Interfacial Adhesion and Mechanical Strength of Pultruded ECR–Glass Fiber Composites with Nanofiller-Infused Epoxy Resin},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {7},
  pages = {321},
  doi = {10.3390/jcs9070321}
}
Kostenlos starten →