Performance Evaluation of Current Design Models in Predicting Shear Resistance of UHPC Girders
Journal of Composites Science · 27.04.2025 · 9 (5) · 211
DOI: 10.3390/jcs9050211 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 27.04.2025. Verfasst von Ahmad Tarawneh und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This manuscript delivers a comprehensive evaluation of five different ultra-high-performance concrete (UHPC) shear resistance models: FHWA-HRT-23-077 (2023), ePCI report (2021), French Standard NF-P-18-710 (2016), Canadian Standards A23.3-04 (2004), and Modified Eurocode2/German DAfStb (2023). The models differ in accounting for the steel fiber and shear reinforcement contribution and determining the angle of inclination of the diagonal compression strut. The evaluation was carried out using an experimental database of 198 UHPC specimens and focused on accuracy, conservatism, and ease of use for each considered model. The database included beams with prestressed and steel reinforcement, different shear reinforcement ratios, and a wide range of geometrical and material properties. In order to apply the FHWA method, a utilization tensile stress (ft,loc) prediction equation was developed. Generally, the FHWA method showed superior performance to the other models in terms of statistical measures and consistent prediction conservatism across variable ranges. Although the ePCI methods yielded the highest conservatism, it can be said that the ePCI, AFGC, and CSA methods showed similar behavior with different degrees of conservatism. The DAfStb method showed the lowest prediction accuracy and the greatest scatter of data. Except for the FHWA method, all methods showed a reduction in conservatism at a high transverse reinforcement ratio.
Zitieren
APA
Tarawneh, A., Amirah, H., Alghossoon, A., Almasabha, G., Al-Mazaidh, R., & Saleh, E. (2025). Performance Evaluation of Current Design Models in Predicting Shear Resistance of UHPC Girders. Journal of Composites Science, 9(5), 211. https://doi.org/10.3390/jcs9050211
Vancouver
Tarawneh A, Amirah H, Alghossoon A, Almasabha G, Al-Mazaidh R, Saleh E. Performance Evaluation of Current Design Models in Predicting Shear Resistance of UHPC Girders. Journal of Composites Science. 2025;9(5):211. doi:10.3390/jcs9050211
BibTeX
@article{Tarawneh2025,
author = {Tarawneh, Ahmad and Amirah, Hadeel and Alghossoon, Abdullah and Almasabha, Ghassan and Al-Mazaidh, Ra’ed and Saleh, Eman},
title = {Performance Evaluation of Current Design Models in Predicting Shear Resistance of UHPC Girders},
journal = {Journal of Composites Science},
year = {2025},
volume = {9},
number = {5},
pages = {211},
doi = {10.3390/jcs9050211}
}
EUVIMED