EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Nanoclay Type on the Mechanical Properties and Antibacterial Activity of Chitosan/PVA Nanocomposite Films

Hadisehsadat Farrokhi, Mojtaba Koosha, Navid Nasirizadeh, Mahshid Salari, Majid Abdouss, Tianduo Li, Yinghua Gong

Journal of Composites Science · 02.07.2024 · 8 (7) · 255

DOI: 10.3390/jcs8070255 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 02.07.2024. Verfasst von Hadisehsadat Farrokhi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jinan High-End Foreign Experts Recruitment Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanoclays are a class of nanomaterials extensively used to prepare polymer nanocomposites. In this study, four types of common nanoclays were selected to prepare chitosan–polyvinyl alcohol (CP) nanocomposite films. Montmorillonite cloisite Na+ (MMT), organically modified montmorillonite (OMMT), and bentonite (BNT), as layered aluminosilicates, and halloysite nanotubes (HNT), as a tubular nanoclay, were blended with CP films at concentrations of 1.5, 3 and 4.5%. The nanocomposite films were characterized by FTIR, XRD, SEM/EDX, AFM, tensile strength, and antibacterial tests. SEM/EDX results showed a more uniform distribution of the OMMT and HNT nanoclays in the polymer matrix. AFM images showed a rougher surface for nanocomposite films compared to CP film. Increasing the nanoclay concentration in the films from 1.5 to 4.5% resulted in higher tensile strength for HNT and MMT while the trend was reversed for OMMT and BNT. Among the samples, nanocomposite films composed of OMMT and BNT showed the highest tensile strength at the lowest concentrations (CP-OMMT1.5 99 ± 3.7 MPa, CP-B1.5 81 ± 1.5 MPa). The nanocomposite films prepared from OMMT showed the highest antibacterial activity against E. coli and S. aureus with an inhibition zone of 15 and 19 mm, respectively. The results of this study showed that BNT and OMMT are promising nanoclays for enhancing the mechanical properties and antibacterial activity of hydrophilic polymers. The results of this research can provide new insights into selecting suitable nanoclays for different applications.

Förderung

  • Jinan High-End Foreign Experts Recruitment Program

Zitieren

APA

Farrokhi, H., Koosha, M., Nasirizadeh, N., Salari, M., Abdouss, M., Li, T., & Gong, Y. (2024). The Effect of Nanoclay Type on the Mechanical Properties and Antibacterial Activity of Chitosan/PVA Nanocomposite Films. Journal of Composites Science, 8(7), 255. https://doi.org/10.3390/jcs8070255

Vancouver

Farrokhi H, Koosha M, Nasirizadeh N, Salari M, Abdouss M, Li T, et al. The Effect of Nanoclay Type on the Mechanical Properties and Antibacterial Activity of Chitosan/PVA Nanocomposite Films. Journal of Composites Science. 2024;8(7):255. doi:10.3390/jcs8070255

BibTeX
@article{Farrokhi2024,
  author = {Farrokhi, Hadisehsadat and Koosha, Mojtaba and Nasirizadeh, Navid and Salari, Mahshid and Abdouss, Majid and Li, Tianduo and Gong, Yinghua},
  title = {The Effect of Nanoclay Type on the Mechanical Properties and Antibacterial Activity of Chitosan/PVA Nanocomposite Films},
  journal = {Journal of Composites Science},
  year = {2024},
  volume = {8},
  number = {7},
  pages = {255},
  doi = {10.3390/jcs8070255}
}
Kostenlos starten →