Bond Behavior of Stainless-Steel and Ordinary Reinforcement Bars in Refractory Castables under Elevated Temperatures
Journal of Composites Science · 23.11.2023 · 7 (12) · 485
DOI: 10.3390/jcs7120485 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 23.11.2023. Verfasst von Linas Plioplys und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.
Abstract (Originalsprache)
Refractory castables, i.e., refractory aggregates and ultra-fine particle mixtures with calcium aluminate cement (CAC) and deflocculants, were created 40 years ago for the metallurgy and petrochemical industries. These materials demonstrate outstanding performance even over 1000 °C. Typically, they have no structural reinforcement, resisting compression stresses because of the combination of temperature and mechanical loads. This study is a part of the research project that develops high-temperature resistance composite material suitable for fire and explosion protection of building structures. However, this application is impossible without structural reinforcement, and the bond performance problem becomes essential under high temperatures. This experimental work conducts pull-out tests of austenitic stainless 304 steel bars and typical structural S500 steel bars embedded in refractory castables after high-temperature treatments. This study includes plain and ribbed bars and considers two castable materials designed with 25 wt% CAC content for 50 MPa compressive strength after drying (typical design) and 100 MPa strength (modified with 2.5 wt% microsilica). This test program includes 115 samples for pull-out tests and 88 specimens for compression. As expected, the tests demonstrated the plain bars’ inability to resist the bond stresses already at 400 °C; on the contrary, ribbed bars, even made of structural steel, could ensure a mechanical bond with cement matrix up to 1000 °C. However, only stainless steel bars formed a reliable bond with the high-performance castable, determining a promising object for high-temperature applications. Still, the scatter of the test results did not ensure a reliable bonding model. In addition, the castable strength might not be optimal to ensure maximum bond performance. Thus, the test results clarified the research objectives for further developing the reinforced composite.
Förderung
- European Regional Development Fund
Zitieren
APA
Plioplys, L., Kudžma, A., Sokolov, A., Antonovič, V., & Gribniak, V. (2023). Bond Behavior of Stainless-Steel and Ordinary Reinforcement Bars in Refractory Castables under Elevated Temperatures. Journal of Composites Science, 7(12), 485. https://doi.org/10.3390/jcs7120485
Vancouver
Plioplys L, Kudžma A, Sokolov A, Antonovič V, Gribniak V. Bond Behavior of Stainless-Steel and Ordinary Reinforcement Bars in Refractory Castables under Elevated Temperatures. Journal of Composites Science. 2023;7(12):485. doi:10.3390/jcs7120485
BibTeX
@article{Plioplys2023,
author = {Plioplys, Linas and Kudžma, Andrius and Sokolov, Aleksandr and Antonovič, Valentin and Gribniak, Viktor},
title = {Bond Behavior of Stainless-Steel and Ordinary Reinforcement Bars in Refractory Castables under Elevated Temperatures},
journal = {Journal of Composites Science},
year = {2023},
volume = {7},
number = {12},
pages = {485},
doi = {10.3390/jcs7120485}
}
EUVIMED