EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printed and Embedded Strain Sensors in Structural Composites for Loading Monitoring and Damage Diagnostics

Dongfang Zhao, Xingyu Liu, Jacob Meves, Christopher Billings, Yingtao Liu

Journal of Composites Science · 14.10.2023 · 7 (10) · 437

DOI: 10.3390/jcs7100437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 14.10.2023. Verfasst von Dongfang Zhao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Oklahoma Aerospace and Defense Innovation Institute (OADII), Data Institute for Societal Challenges (DISC), Office of the Vice President for Research and Partnerships, University of Oklahoma.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of novel embedded sensors for structural health monitoring (SHM) is crucial to provide real-time assessments of composite structures, ensuring safety, and prolonging their service life. Early damage diagnostics through advanced sensors can lead to timely maintenance, reducing costs and preventing potential catastrophic failures. This paper presents the synthesis, 3D printing, and characterization of novel embedded strain sensors using multi-walled carbon nanotube (MWCNT) -enhanced nanocomposites in fiberglass reinforced composites for potential damage diagnostics and SHM applications. MWCNTs are dispersed within structural epoxy for the additive manufacturing of nanocomposites with piezoresistive sensing capability. The 3D-printed nanocomposite sensors are embedded in fiberglass-reinforced composite laminates. The piezoresistive sensing capabilities of the 3D-printed sensors within composites are characterized by applying different levels of maximum loads and load rates under three-point bending loads. Additionally, the long-term reliability of the developed strain sensors is evaluated up to 1000 cycles. The recorded piezoresistive sensing signals show high sensitivity for the externally applied bending loads with advanced gauge factor up to 100, resulting in potential load sensing capability for in-situ damage diagnostics and real-time SHM for structural composites.

Förderung

  • Oklahoma Aerospace and Defense Innovation Institute (OADII)
  • Data Institute for Societal Challenges (DISC)
  • Office of the Vice President for Research and Partnerships, University of Oklahoma

Zitieren

APA

Zhao, D., Liu, X., Meves, J., Billings, C., & Liu, Y. (2023). 3D Printed and Embedded Strain Sensors in Structural Composites for Loading Monitoring and Damage Diagnostics. Journal of Composites Science, 7(10), 437. https://doi.org/10.3390/jcs7100437

Vancouver

Zhao D, Liu X, Meves J, Billings C, Liu Y. 3D Printed and Embedded Strain Sensors in Structural Composites for Loading Monitoring and Damage Diagnostics. Journal of Composites Science. 2023;7(10):437. doi:10.3390/jcs7100437

BibTeX
@article{Zhao2023,
  author = {Zhao, Dongfang and Liu, Xingyu and Meves, Jacob and Billings, Christopher and Liu, Yingtao},
  title = {3D Printed and Embedded Strain Sensors in Structural Composites for Loading Monitoring and Damage Diagnostics},
  journal = {Journal of Composites Science},
  year = {2023},
  volume = {7},
  number = {10},
  pages = {437},
  doi = {10.3390/jcs7100437}
}
Kostenlos starten →