EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Water Diffusion in Additively Manufactured Polymers: Experimental Characterisation and Anisotropic Finite-Element Modelling

Boyu Li, Konstantinos P. Baxevanakis, Vadim V. Silberschmidt

Journal of Composites Science · 16.11.2026 · 10 (11) · 614

DOI: 10.3390/jcs10110614 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 16.11.2026. Verfasst von Boyu Li und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of polymers produced with fused deposition modelling (FDM) in marine environments is a critical property for their engineering applications. This study investigates the water-ageing behaviour of polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and carbon-fibre-reinforced PETG (PETG-CF) employing experimental testing and numerical modelling. Water-immersion tests were conducted for two weeks to evaluate the moisture uptake, while changes in surface roughness before and after ageing were assessed together with Shore D hardness. Finite-element (FE) diffusion models based on Fickian diffusion theory were developed in ABAQUS to simulate the moisture transport and predict the evolution of moisture concentration. The obtained results showed that all polymers exhibited diffusion behaviour consistent with Fick’s law. Water ageing affected both surface roughness and hardness of the studied materials, although the extent of degradation varied among them. Good agreement was obtained between the experimental observations and numerical predictions, confirming the capability of the ABAQUS models to accurately capture the moisture-diffusion behaviour. Furthermore, an anisotropic diffusivity assumption, introduced to account for FDM-induced defects and directional transport pathways, was verified through FE analysis. Compared with the detailed isotropic model, the simplified anisotropic model achieved reasonable prediction accuracy while significantly reducing the computational cost.

Zitieren

APA

Li, B., Baxevanakis, K. P., & Silberschmidt, V. V. (2026). Water Diffusion in Additively Manufactured Polymers: Experimental Characterisation and Anisotropic Finite-Element Modelling. Journal of Composites Science, 10(11), 614. https://doi.org/10.3390/jcs10110614

Vancouver

Li B, Baxevanakis KP, Silberschmidt VV. Water Diffusion in Additively Manufactured Polymers: Experimental Characterisation and Anisotropic Finite-Element Modelling. Journal of Composites Science. 2026;10(11):614. doi:10.3390/jcs10110614

BibTeX
@article{Li2026,
  author = {Li, Boyu and Baxevanakis, Konstantinos P. and Silberschmidt, Vadim V.},
  title = {Water Diffusion in Additively Manufactured Polymers: Experimental Characterisation and Anisotropic Finite-Element Modelling},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {614},
  doi = {10.3390/jcs10110614}
}
Kostenlos starten →