EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Ta2O5 Addition on the Surface Characteristics, In Vitro Bioactivity, and Early Cellular Responses of Single-Layer SLM Titanium-Based Surface Layers

Wei-Ting Lin, Chieh-Tsung Wang, Chi-Sheng Chien, Tsung-Yuan Kuo, Jun-Wei Huang, Ching-Ping Chang, Ru-Li Lin, Chin-Juei Tung

Journal of Composites Science · 08.11.2026 · 10 (11) · 602

DOI: 10.3390/jcs10110602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 08.11.2026. Verfasst von Wei-Ting Lin und 7 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Chi Mei Medical Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving the surface and biological performance of titanium is important for biomedical applications. This study evaluated titanium-based surface layers fabricated on Ti substrates by single-layer selective laser melting (SLM) using commercially pure Ti (CP-Ti) powders containing 0, 1, or 2 wt.% Ta2O5. Surface morphology, composition, roughness, hardness, wettability, simulated body fluid (SBF) deposition, and early MG-63 cell responses were examined. The Ta2O5-containing specimens exhibited lower roughness (3.4–5.0 versus 4.9–6.7 μm), higher hardness (226–239 versus 173 HV0.2), and lower water contact angles (31–33° versus 47°) than CP-Ti. EDS detected Ta and O, while XRD showed weak features consistent with retained Ta2O5. During SBF immersion, Ta2O5-containing specimens showed earlier deposits and greater apparent surface coverage, reaching 100% in analyzed SEM images after 28 days. SEM suggested more extensive MG-63 spreading and filopodial extension, particularly at 24 h. At 24 h, both Ta2O5-containing groups showed higher mean CCK-8 absorbance than CP-Ti, although between-group significance was not established. These findings indicate promising surface properties and early cellular responses, subject to differences in feedstock preparation and processing conditions.

Förderung

  • National Science and Technology Council
  • Chi Mei Medical Center

Zitieren

APA

Lin, W., Wang, C., Chien, C., Kuo, T., Huang, J., Chang, C., Lin, R., & Tung, C. (2026). Influence of Ta2O5 Addition on the Surface Characteristics, In Vitro Bioactivity, and Early Cellular Responses of Single-Layer SLM Titanium-Based Surface Layers. Journal of Composites Science, 10(11), 602. https://doi.org/10.3390/jcs10110602

Vancouver

Lin W, Wang C, Chien C, Kuo T, Huang J, Chang C, et al. Influence of Ta2O5 Addition on the Surface Characteristics, In Vitro Bioactivity, and Early Cellular Responses of Single-Layer SLM Titanium-Based Surface Layers. Journal of Composites Science. 2026;10(11):602. doi:10.3390/jcs10110602

BibTeX
@article{Lin2026,
  author = {Lin, Wei-Ting and Wang, Chieh-Tsung and Chien, Chi-Sheng and Kuo, Tsung-Yuan and Huang, Jun-Wei and Chang, Ching-Ping and Lin, Ru-Li and Tung, Chin-Juei},
  title = {Influence of Ta2O5 Addition on the Surface Characteristics, In Vitro Bioactivity, and Early Cellular Responses of Single-Layer SLM Titanium-Based Surface Layers},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {602},
  doi = {10.3390/jcs10110602}
}
Kostenlos starten →