EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polypropylene-Based Wood-Plastic Composites from Recovered and Beetle-Infested Wood: Effect of Pre-Damaged Fibers on Mechanical Performance

Sebastian Wiedl, Michaela Sehy, Frederik Obermeier, Uwa Orji Uyor, Peter Karlinger, Manuela List

Journal of Composites Science · 05.08.2026 · 10 (8) · 415

DOI: 10.3390/jcs10080415 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 05.08.2026. Verfasst von Sebastian Wiedl und 5 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bavarian State Ministry for Science and Art.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing scarcity of conventional feedstocks for WPCs requires alternative resources supporting circular material flows in the wood-based bioeconomy. This study investigated thermomechanical pulp (TMP) fibers from fresh, recovered, and beetle-infested spruce as well as fresh beech as reinforcements for polypropylene-based WPCs. Fiber geometry was characterized before and after injection molding, and composite performance was evaluated with and without a maleic-anhydride-grafted polypropylene coupling agent. After injection molding, the aspect ratio ranged from 7.1 to 7.9, with recovered spruce showing the highest value. The addition of 30 wt.-% TMP fibers increased the tensile modulus from 1.4 GPa for neat polypropylene to as much as 4.7 GPa for the coupled WPCs. Compatibilization markedly improved strength, resulting in tensile strengths of up to 54 MPa and flexural strengths of up to 80 MPa, compared with 33 MPa and 36 MPa for neat polypropylene, respectively. Recovered and beetle-infested spruce did not impair composite performance and achieved the highest tensile and flexural strength values. Beech-based WPCs showed lower tensile and flexural performance than spruce-based composites but still reached a technically relevant property level. Overall, recovered and beetle-infested spruce and fresh beech represent viable TMP raw materials for mechanically demanding WPC applications.

Förderung

  • Bavarian State Ministry for Science and Art

Zitieren

APA

Wiedl, S., Sehy, M., Obermeier, F., Uyor, U. O., Karlinger, P., & List, M. (2026). Polypropylene-Based Wood-Plastic Composites from Recovered and Beetle-Infested Wood: Effect of Pre-Damaged Fibers on Mechanical Performance. Journal of Composites Science, 10(8), 415. https://doi.org/10.3390/jcs10080415

Vancouver

Wiedl S, Sehy M, Obermeier F, Uyor UO, Karlinger P, List M. Polypropylene-Based Wood-Plastic Composites from Recovered and Beetle-Infested Wood: Effect of Pre-Damaged Fibers on Mechanical Performance. Journal of Composites Science. 2026;10(8):415. doi:10.3390/jcs10080415

BibTeX
@article{Wiedl2026,
  author = {Wiedl, Sebastian and Sehy, Michaela and Obermeier, Frederik and Uyor, Uwa Orji and Karlinger, Peter and List, Manuela},
  title = {Polypropylene-Based Wood-Plastic Composites from Recovered and Beetle-Infested Wood: Effect of Pre-Damaged Fibers on Mechanical Performance},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {8},
  pages = {415},
  doi = {10.3390/jcs10080415}
}
Kostenlos starten →