EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Polishing Protocols and Sugar on the Colour Stability and Stain Reversibility of Supra-Nanospherical Resin Composites: An In Vitro Study

Hawnaz Wshyar, Gollshang Ahmad Mhammed Dalloo

Journal of Composites Science · 29.07.2026 · 10 (8) · 398

DOI: 10.3390/jcs10080398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 29.07.2026. Verfasst von Hawnaz Wshyar und 1 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dental composites are ceramic-reinforced polymers; however, their colour stability is crucial for clinical maintenance, as composite restorations are inherently susceptible to colour change over time. In this in vitro study, eighty standardised 3D-printed samples were fabricated, filled with one of two supra-nanospherical resin composites, divided according to two polishing protocols (standard and reduced), and immersed in black tea with or without sugar for 28 days, after which they were repolished. Colour measurements were performed using a spectrophotometer at baseline (T1), after tea immersion (T2), and after repolishing (T3). Statistical analysis was performed using a three-way repeated-measures mixed ANOVA followed by a Bonferroni post hoc test. The colour outcomes were interpreted against the CIEDE2000 50:50% perceptibility threshold (PT00 = 0.8) and acceptability threshold (AT00 = 1.8). Given the constraints of this in vitro investigation, all specimens exhibited initial discolouration (ΔE001 = 5.85 ± 1.63) that exceeded the acceptability threshold. Following repolishing, overall discolouration was significantly reduced (5.64 ± 1.46), achieving a final recovery (ΔE003 of 0.92 ± 0.56) near the perceptibility threshold. Although Tokuyama PALFIQUE® LX5 might have exhibited lower ΔE than Estelite® Alpha, the choice of composite had no statistically significant impact. Conversely, polishing methods and sugar content significantly influenced the outcomes (p < 0.05). Specifically, the standard method consistently resulted in final residual colour differences below the perceptibility threshold (ΔE003 ≤ PT), whereas the reduced method resulted in values exceeding this threshold. Furthermore, exposure to sucrose resulted in significantly greater residual staining post-treatment compared to plain black tea. Within the limitations of this in vitro study, the findings suggest that while composite selection between similar supra-nanospherical resins does not significantly affect aesthetic longevity, the standard method effectively maintains final residual colour shifts within imperceptible clinical boundaries. Moreover, dietary sucrose may contribute to greater permanent residual staining after repolishing. Nonetheless, as these observations derive from an in vitro model lacking a natural salivary pellicle and biofilm, clinical in vivo validation is required before direct extrapolation to daily dental practice.

Zitieren

APA

Wshyar, H., & Dalloo, G. A. M. (2026). Effect of Polishing Protocols and Sugar on the Colour Stability and Stain Reversibility of Supra-Nanospherical Resin Composites: An In Vitro Study. Journal of Composites Science, 10(8), 398. https://doi.org/10.3390/jcs10080398

Vancouver

Wshyar H, Dalloo GAM. Effect of Polishing Protocols and Sugar on the Colour Stability and Stain Reversibility of Supra-Nanospherical Resin Composites: An In Vitro Study. Journal of Composites Science. 2026;10(8):398. doi:10.3390/jcs10080398

BibTeX
@article{Wshyar2026,
  author = {Wshyar, Hawnaz and Dalloo, Gollshang Ahmad Mhammed},
  title = {Effect of Polishing Protocols and Sugar on the Colour Stability and Stain Reversibility of Supra-Nanospherical Resin Composites: An In Vitro Study},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {8},
  pages = {398},
  doi = {10.3390/jcs10080398}
}
Kostenlos starten →