EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Life Cycle Assessment of 3D Concrete Printed Buildings: A Review of Methodologies, Standards and EPBD Compliance

Daniel Harris, Suleman Ayub Khan, Swathi Balasubramanian, Mamoun Alqedra, Mehran Khan, Ciaran McNally

Journal of Composites Science · 09.07.2026 · 10 (7) · 367

DOI: 10.3390/jcs10070367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 09.07.2026. Verfasst von Daniel Harris und 5 weiteren Autor:innen. Die Arbeit nennt 98 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Construct Innovate Technology Centre, Ecocem Ireland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D concrete printing (3DCP) is an emerging modern method of construction with potential to improve construction efficiency, reduce labour requirements, and support the delivery of sustainable housing. In Ireland, its recent adoption coincides with increasing policy emphasis on modern methods of construction and the introduction of stricter European requirements for assessing the climate impact of buildings. The recast Energy Performance of Buildings Directive (EPBD) introduces progressive requirements for the calculation and reporting of whole-life Global Warming Potential (GWP) for new buildings, creating a need for Life Cycle Assessment (LCA) methodologies aligned with current regulatory requirements and capable of capturing the specific characteristics of emerging construction technologies. This paper reviews the applicability of the EPBD, EN 15978, EN 15804, Level(s), and relevant Irish methodologies to 3DCP buildings. It also examines existing LCA studies on 3DCP and evaluates their methodological scope, system boundaries, functional units, data sources, and alignment with current regulatory requirements. The review shows that most existing 3DCP LCA studies remain focused on materials, components, or limited life-cycle stages, with cradle-to-gate assessments being particularly common. Consequently, many published studies do not fully align with the whole-building, cradle-to-grave assessment framework introduced under the revised EPBD.. The review also identifies a lack of LCA methodologies specifically tailored to 3DCP buildings, particularly in relation to printable material design, construction-process energy consumption, material efficiency, reinforcement strategy, durability, maintenance, and end-of-life scenarios. These gaps limit the comparability and regulatory relevance of current sustainability assessments. The paper concludes that EPBD-compliant whole-life carbon assessments of complete 3DCP buildings are urgently needed, alongside the development of 3DCP-specific methodological guidance and data to support reliable environmental benchmarking and wider adoption of the technology in Ireland and Europe.

Förderung

  • Construct Innovate Technology Centre
  • Ecocem Ireland

Zitieren

APA

Harris, D., Khan, S. A., Balasubramanian, S., Alqedra, M., Khan, M., & McNally, C. (2026). Life Cycle Assessment of 3D Concrete Printed Buildings: A Review of Methodologies, Standards and EPBD Compliance. Journal of Composites Science, 10(7), 367. https://doi.org/10.3390/jcs10070367

Vancouver

Harris D, Khan SA, Balasubramanian S, Alqedra M, Khan M, McNally C. Life Cycle Assessment of 3D Concrete Printed Buildings: A Review of Methodologies, Standards and EPBD Compliance. Journal of Composites Science. 2026;10(7):367. doi:10.3390/jcs10070367

BibTeX
@article{Harris2026,
  author = {Harris, Daniel and Khan, Suleman Ayub and Balasubramanian, Swathi and Alqedra, Mamoun and Khan, Mehran and McNally, Ciaran},
  title = {Life Cycle Assessment of 3D Concrete Printed Buildings: A Review of Methodologies, Standards and EPBD Compliance},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {7},
  pages = {367},
  doi = {10.3390/jcs10070367}
}
Kostenlos starten →