EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of Web Crippling Capacity of Pultruded GFRP Hollow Profiles Under Various Loading Conditions After Elevated Temperatures

Mohamed Ahmed Soumbourou, Ceyhun Aksoylu, Emrah Madenci, Yasin Onuralp Özkılıç

Journal of Composites Science · 19.06.2026 · 10 (6) · 325

DOI: 10.3390/jcs10060325 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 19.06.2026. Verfasst von Mohamed Ahmed Soumbourou und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Necmettin Erbakan University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the residual web crippling behavior of pultruded glass fiber-reinforced polymer (P-GFRP) hollow sections after exposure to elevated temperatures. The primary objective is to evaluate the combined influence of temperature and loading configuration on web crippling capacity, failure mechanisms, and structural performance, and to develop practical prediction models for engineering applications. A total of twenty pultruded GFRP hollow section specimens were exposed to temperatures of 24 °C, 200 °C, 250 °C, 300 °C, and 350 °C and tested under four loading configurations: End Ground (EG), Interior Ground (IG), End Two Flange (ETF), and Interior Two Flange (ITF). In addition to web crippling tests, tensile, SEM-EDS, TGA-DSC, DMA, and FT-IR analyses were conducted to investigate the mechanical, thermal, and microstructural degradation mechanisms. The results showed that elevated temperatures significantly reduced the web crippling capacity, with strength losses reaching up to 80% at 350 °C due to matrix degradation, fiber–matrix debonding, and loss of structural integrity. Among the investigated loading configurations, IG exhibited the highest load-carrying performance, whereas ETF experienced the greatest capacity reduction. A temperature-dependent reduction factor and unified empirical prediction equations were developed and demonstrated good agreement with the experimental results, with experimental-to-predicted ratios ranging from 0.97 to 1.15. The findings provide valuable insight into the post-fire behavior of pultruded GFRP hollow sections and offer practical guidance for the design, assessment, and fire safety evaluation of GFRP structural members exposed to elevated-temperature environments.

Förderung

  • Necmettin Erbakan University

Zitieren

APA

Soumbourou, M. A., Aksoylu, C., Madenci, E., & Özkılıç, Y. O. (2026). Assessment of Web Crippling Capacity of Pultruded GFRP Hollow Profiles Under Various Loading Conditions After Elevated Temperatures. Journal of Composites Science, 10(6), 325. https://doi.org/10.3390/jcs10060325

Vancouver

Soumbourou MA, Aksoylu C, Madenci E, Özkılıç YO. Assessment of Web Crippling Capacity of Pultruded GFRP Hollow Profiles Under Various Loading Conditions After Elevated Temperatures. Journal of Composites Science. 2026;10(6):325. doi:10.3390/jcs10060325

BibTeX
@article{Soumbourou2026,
  author = {Soumbourou, Mohamed Ahmed and Aksoylu, Ceyhun and Madenci, Emrah and Özkılıç, Yasin Onuralp},
  title = {Assessment of Web Crippling Capacity of Pultruded GFRP Hollow Profiles Under Various Loading Conditions After Elevated Temperatures},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {325},
  doi = {10.3390/jcs10060325}
}
Kostenlos starten →