EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sonochemical Biosilica Derived from Rice Husk Ash for Cementitious Composites in 3D Concrete Printing

Ivan Vasilevich Korchunov, Sergey Alekseevich Udodov, Philip Aleksandrovich Belov, Ekaterina Alekseevna Smolskaya, Ekaterina Nikolaevna Potapova, Aleksandr Alekseevich Susla, Olga Eduardovna Shubabko, Ksenia Sergeevna Serkina, Anna Viktorovna Shkalenko

Journal of Composites Science · 31.05.2026 · 10 (6) · 302

DOI: 10.3390/jcs10060302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 31.05.2026. Verfasst von Ivan Vasilevich Korchunov und 8 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Moscow Polytechnic University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study presents an approach to the synthesis of micro- and nano-sized biosilica from rice husk ash (RHA) and describes its effective incorporation into cementitious composites for 3D concrete printing (3DCP). It is demonstrated that the calcination of rice husk at 700 °C, followed by sonochemical treatment, leads to the formation of a nanoscale silica phase with high pozzolanic reactivity. X-ray powder diffraction (XRD), infrared spectroscopy (IR), differential thermogravimetric analysis (DTG), and scanning electron microscopy (SEM) show that the incorporation of nano-biosilica (NBS) into the cementitious composites accelerates the hydration process through a nucleation effect and pozzolanic reaction. This, in turn, densifies the hardened cement microstructure and improves compressive strength significantly. Laboratory 3D concrete printing tests demonstrate that adding 1.72 wt.% NBS improves shape retention, decreases layer slump, and improves interlayer bond strength. The results indicate the viability of rice husk ash-derived biosilica as a supplementary cementitious material (SCM) in 3DCP due to its positive influence on the concrete mortar properties and parameters.

Förderung

  • Moscow Polytechnic University

Zitieren

APA

Korchunov, I. V., Udodov, S. A., Belov, P. A., Smolskaya, E. A., Potapova, E. N., Susla, A. A., Shubabko, O. E., Serkina, K. S., & Shkalenko, A. V. (2026). Sonochemical Biosilica Derived from Rice Husk Ash for Cementitious Composites in 3D Concrete Printing. Journal of Composites Science, 10(6), 302. https://doi.org/10.3390/jcs10060302

Vancouver

Korchunov IV, Udodov SA, Belov PA, Smolskaya EA, Potapova EN, Susla AA, et al. Sonochemical Biosilica Derived from Rice Husk Ash for Cementitious Composites in 3D Concrete Printing. Journal of Composites Science. 2026;10(6):302. doi:10.3390/jcs10060302

BibTeX
@article{Korchunov2026,
  author = {Korchunov, Ivan Vasilevich and Udodov, Sergey Alekseevich and Belov, Philip Aleksandrovich and Smolskaya, Ekaterina Alekseevna and Potapova, Ekaterina Nikolaevna and Susla, Aleksandr Alekseevich and Shubabko, Olga Eduardovna and Serkina, Ksenia Sergeevna and Shkalenko, Anna Viktorovna},
  title = {Sonochemical Biosilica Derived from Rice Husk Ash for Cementitious Composites in 3D Concrete Printing},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {302},
  doi = {10.3390/jcs10060302}
}
Kostenlos starten →