EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual-Material FFF Honeycomb Structures with Interlocking TPU/PLA Joints: Experimental and Analytical Investigation

Thomas Panagiotopoulos, Ioannis Fillipos Kyriakidis, Michel Theodor Mansour, Constantine David, Dimitrios Tzetzis, Apostolos Korlos, Konstantinos Tsongas

Journal of Composites Science · 27.05.2026 · 10 (6) · 292

DOI: 10.3390/jcs10060292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 27.05.2026. Verfasst von Thomas Panagiotopoulos und 6 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Account for Research Funds of the International Hellenic University, Measures to Promote Research through Financial Support to Laboratories and Institutes of the International Hellenic University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dual-material additive manufacturing enables the design of cellular structures with a tailored mechanical response through controlled material distribution and interfacial architecture. In this research, honeycomb structures fabricated by Fused Filament Fabrication (FFF) using dual-material TPU/PLA configurations have been systematically investigated. Particular emphasis is placed on interlocking TPU/PLA joint designs, implemented through tau-shaped and teeth-based geometries, to evaluate their role in load transfer and structural performance. An experimental–analytical model has been developed to characterize the compressive force–displacement response of dual-material honeycombs, capturing the three characteristic deformation regimes—initial stiffness, progressive collapse, and densification—while linking the effective stiffness to the underlying beam-lattice mechanics. The relative contributions of axial and bending deformation mechanisms are quantified through a comparative beam element approach, introducing dimensionless coefficients that reflect the governing deformation mode. The results reveal that the mechanical response is bending-dominated for the examined configurations. The configuration with PLA at the nodes and TPU at the struts exhibits a higher load-carrying capacity and a more stable collapse regime due to a more balanced axial–bending interaction. In contrast, alternative material distributions lead to earlier instability and reduced structural efficiency. The proposed analytical model demonstrates excellent agreement with the experimental data across all configurations. The results demonstrate that properly designed dual-material interlocks can enhance load transfer, decrease stress concentrations, and refine the overall mechanical performance of lightweight cellular structures.

Förderung

  • Special Account for Research Funds of the International Hellenic University
  • Measures to Promote Research through Financial Support to Laboratories and Institutes of the International Hellenic University

Zitieren

APA

Panagiotopoulos, T., Kyriakidis, I. F., Mansour, M. T., David, C., Tzetzis, D., Korlos, A., & Tsongas, K. (2026). Dual-Material FFF Honeycomb Structures with Interlocking TPU/PLA Joints: Experimental and Analytical Investigation. Journal of Composites Science, 10(6), 292. https://doi.org/10.3390/jcs10060292

Vancouver

Panagiotopoulos T, Kyriakidis IF, Mansour MT, David C, Tzetzis D, Korlos A, et al. Dual-Material FFF Honeycomb Structures with Interlocking TPU/PLA Joints: Experimental and Analytical Investigation. Journal of Composites Science. 2026;10(6):292. doi:10.3390/jcs10060292

BibTeX
@article{Panagiotopoulos2026,
  author = {Panagiotopoulos, Thomas and Kyriakidis, Ioannis Fillipos and Mansour, Michel Theodor and David, Constantine and Tzetzis, Dimitrios and Korlos, Apostolos and Tsongas, Konstantinos},
  title = {Dual-Material FFF Honeycomb Structures with Interlocking TPU/PLA Joints: Experimental and Analytical Investigation},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {292},
  doi = {10.3390/jcs10060292}
}
Kostenlos starten →