3D-Printed Gypsum–Cement–Pozzolan Composites with Crumb Rubber: Strength and Durability
Journal of Composites Science · 22.05.2026 · 10 (6) · 281
DOI: 10.3390/jcs10060281 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 22.05.2026. Verfasst von Girts Kolendo und 3 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research investigates the formation and behavior of sustainable crumb rubber-modified gypsum–cement–pozzolan (GCP) composites, with a view to their use in a broad concept for construction. GCP binders are gaining attention as a low-carbon replacement for Portland cement, and the addition of recycled rubber helps the achievement of circular economy goals and potentially increases durability. The present research evaluates the impact of crumb rubber (CR) on the mechanical strength, water absorption, dimensional stability, and freeze–thaw resistance of 3D-printed GCP-rubber composites. Composite blends of variable proportions of crumb rubber were prepared at constant binder ratios. Mechanical properties were defined by prism specimens (40 × 40 × 160 mm) by the flexural and compressive strengths, and deformation was determined by micrometers to measure longitudinal strain as a function of curing. Water absorption was determined prior to freeze–thaw cycling to define pore saturation. Durability was investigated using two approaches: (1) controlled freeze–thaw experiments on cube specimens, with XF1 grade performance achieved, and (2) ultrasonic pulse velocity (UPV) testing of specimens 3D-printed for assessing internal structural change after long-term frost exposure. Results showed that compressive strength decreased moderately (10–20%) with increasing rubber content from 17% up to 50%, while flexural strength improved up to 15%, showing the elastomeric action of CR. Water absorption was reduced by 5–8% in the rubber-modified blends due to the hydrophobic character of rubber. Deformation tests also confirmed minimum length variation (
Zitieren
APA
Kolendo, G., Korjakins, A., Bajare, D., & Sahmenko, G. (2026). 3D-Printed Gypsum–Cement–Pozzolan Composites with Crumb Rubber: Strength and Durability. Journal of Composites Science, 10(6), 281. https://doi.org/10.3390/jcs10060281
Vancouver
Kolendo G, Korjakins A, Bajare D, Sahmenko G. 3D-Printed Gypsum–Cement–Pozzolan Composites with Crumb Rubber: Strength and Durability. Journal of Composites Science. 2026;10(6):281. doi:10.3390/jcs10060281
BibTeX
@article{Kolendo2026,
author = {Kolendo, Girts and Korjakins, Aleksandrs and Bajare, Diana and Sahmenko, Genadijs},
title = {3D-Printed Gypsum–Cement–Pozzolan Composites with Crumb Rubber: Strength and Durability},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {6},
pages = {281},
doi = {10.3390/jcs10060281}
}
EUVIMED