EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Steel-Reinforced Recycled Thermoplastic Composite for Wind Turbine Towers: Experimental and Full-Scale Validation

Cihan Ciftci, Hasan Tolga Altikaya

Journal of Composites Science · 19.05.2026 · 10 (5) · 275

DOI: 10.3390/jcs10050275 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 19.05.2026. Verfasst von Cihan Ciftci und 1 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Türkiye.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for sustainable and lightweight structural systems has motivated the development of alternative materials for wind turbine tower applications, where conventional steel structures are associated with high material consumption and environmental impact. In this study, a novel steel-reinforced recycled thermoplastic composite system is proposed as an alternative structural solution. To enable the design and practical application of such composite systems, the mechanical properties of the recycled thermoplastic matrix were experimentally characterized. Compression and tensile tests revealed average yield strengths of approximately 32 MPa in compression and 7.8 MPa in tension. To account for the environmental conditions encountered in field applications, the temperature-dependent mechanical behavior of the material was investigated. Since the critical mechanical response of the thermoplastic matrix in the composite system is governed by compression rather than tension, the study was limited to compression tests under elevated temperatures. The results show that the compressive yield strength decreases to approximately 31 MPa at 55 °C. An analytical model based on the transformed-section approach was also developed to predict the flexural behavior of the composite section and was validated through three-point bending tests, with an analytically predicted yield load of approximately 31.5 kN showing good agreement with experimental results. To assess structural applicability at a larger scale, a full-scale composite wind turbine tower was designed and manufactured, and its dynamic performance was evaluated through field measurements under natural wind loading conditions. The results indicate that the composite tower exhibits comparable dynamic behavior to a conventional steel tower, with a first natural frequency of approximately 3.08 Hz compared to 2.89 Hz for the steel tower, along with enhanced damping characteristics. These findings demonstrate that steel-reinforced recycled thermoplastic composites offer a promising and sustainable alternative for wind turbine tower applications, with potential for broader use in structural systems.

Förderung

  • Scientific and Technological Research Council of Türkiye

Zitieren

APA

Ciftci, C., & Altikaya, H. T. (2026). A Steel-Reinforced Recycled Thermoplastic Composite for Wind Turbine Towers: Experimental and Full-Scale Validation. Journal of Composites Science, 10(5), 275. https://doi.org/10.3390/jcs10050275

Vancouver

Ciftci C, Altikaya HT. A Steel-Reinforced Recycled Thermoplastic Composite for Wind Turbine Towers: Experimental and Full-Scale Validation. Journal of Composites Science. 2026;10(5):275. doi:10.3390/jcs10050275

BibTeX
@article{Ciftci2026,
  author = {Ciftci, Cihan and Altikaya, Hasan Tolga},
  title = {A Steel-Reinforced Recycled Thermoplastic Composite for Wind Turbine Towers: Experimental and Full-Scale Validation},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {5},
  pages = {275},
  doi = {10.3390/jcs10050275}
}
Kostenlos starten →