EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Expanded Perlite on Pore Structure and Physical Properties of Lightweight Aggregates Derived from Red Clay

Paniti Moolpradab, Montree Hankoy, Jianfeng Zhang, Nittaya Keawprak, Mettaya Kitiwan, Phacharaphon Tunthawiroon

Journal of Composites Science · 14.05.2026 · 10 (5) · 264

DOI: 10.3390/jcs10050264 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 14.05.2026. Verfasst von Paniti Moolpradab und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science, Research and Innovation Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The utilization of locally sourced raw materials for lightweight aggregate (LWA) production has attracted increasing attention due to its potential for cost reduction and sustainable material development. This study investigates the effect of expanded perlite addition (10–40 wt%) on the physical, structural, and mechanical properties of LWAs derived from In Buri red clay, sintered at a relatively low temperature of 800 °C without a conventional high-temperature bloating process. X-ray diffraction (XRD) analysis revealed that quartz remained the dominant phase after sintering, with minor albite and residual illite, indicating limited phase transformation. Thermal analysis showed that major mass loss occurred below 600 °C, confirming that 800 °C is sufficient for removing volatile components. SEM observations demonstrated that increasing perlite content led to the development of a more porous and interconnected microstructure. As the expanded perlite content increased, the bulk density decreased from 1.31 to 0.80 g/cm3, while the apparent porosity and water absorption increased to 48.5% and 60.8%, respectively. Conversely, crushing strength decreased due to increased porosity. These results demonstrate that expanded perlite is an effective additive for tailoring the microstructure and performance of LWAs at low sintering temperature. The developed materials show strong potential for horticultural applications.

Förderung

  • National Science, Research and Innovation Fund

Zitieren

APA

Moolpradab, P., Hankoy, M., Zhang, J., Keawprak, N., Kitiwan, M., & Tunthawiroon, P. (2026). Influence of Expanded Perlite on Pore Structure and Physical Properties of Lightweight Aggregates Derived from Red Clay. Journal of Composites Science, 10(5), 264. https://doi.org/10.3390/jcs10050264

Vancouver

Moolpradab P, Hankoy M, Zhang J, Keawprak N, Kitiwan M, Tunthawiroon P. Influence of Expanded Perlite on Pore Structure and Physical Properties of Lightweight Aggregates Derived from Red Clay. Journal of Composites Science. 2026;10(5):264. doi:10.3390/jcs10050264

BibTeX
@article{Moolpradab2026,
  author = {Moolpradab, Paniti and Hankoy, Montree and Zhang, Jianfeng and Keawprak, Nittaya and Kitiwan, Mettaya and Tunthawiroon, Phacharaphon},
  title = {Influence of Expanded Perlite on Pore Structure and Physical Properties of Lightweight Aggregates Derived from Red Clay},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {5},
  pages = {264},
  doi = {10.3390/jcs10050264}
}
Kostenlos starten →