Experimental and RSM-Based Investigation of the Crashworthiness Characteristics of Aluminium/Carbon Hybrid Composites Under Axial Loading
Journal of Composites Science · 28.04.2026 · 10 (5) · 235
DOI: 10.3390/jcs10050235 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 28.04.2026. Verfasst von Tabrej Khan und 3 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Metal–polymer hybrid composites blend the high strength and stiffness of metals with the low weight and corrosion resistance of polymers. This synergy is expected to provide better crashworthiness, energy absorption, and design flexibility compared to traditional single-material structures. The present research intended to examine the crashworthiness features of an aluminium/CFRP structure under various operating conditions by optimizing process parameters through Design Expert software and experimental investigation. The design of the experiment was carried out using Design Expert software version 13 with response surface methodology (RSM) where working temperature, isothermal holding time, and crushing speed are taken as process variables. The test results demonstrate that the peak load, energy absorption (EA), and specific energy absorption (SEA) are significantly higher for the sample with working temperature, isothermal holding time, and crushing speed set at 25 °C, 13 h, and 5 mm/min, respectively. Moreover, EA and SEA are also relatively higher for this sample compared to the other samples. The test results showcased that temperature is a decisive factor for the mechanical properties of the tube, which is clearly reflected in experimental results. The higher peak force and EA indicate greater strength and a more energy-dissipative system. Moreover, a close correlation was observed between the experimentally measured and RSM-based optimization. Hence, RSM was found to be suitable for designing the experiments and for understanding the failure modes of the CFRP/aluminium structure.
Zitieren
APA
Khan, T., Chamola, R., Junaedi, H., & Sebaey, T. A. (2026). Experimental and RSM-Based Investigation of the Crashworthiness Characteristics of Aluminium/Carbon Hybrid Composites Under Axial Loading. Journal of Composites Science, 10(5), 235. https://doi.org/10.3390/jcs10050235
Vancouver
Khan T, Chamola R, Junaedi H, Sebaey TA. Experimental and RSM-Based Investigation of the Crashworthiness Characteristics of Aluminium/Carbon Hybrid Composites Under Axial Loading. Journal of Composites Science. 2026;10(5):235. doi:10.3390/jcs10050235
BibTeX
@article{Khan2026,
author = {Khan, Tabrej and Chamola, Rahul and Junaedi, Harri and Sebaey, Tamer A.},
title = {Experimental and RSM-Based Investigation of the Crashworthiness Characteristics of Aluminium/Carbon Hybrid Composites Under Axial Loading},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {5},
pages = {235},
doi = {10.3390/jcs10050235}
}
EUVIMED