EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Open-Hole Tension/Compression Response of Hybrid Pseudo-Woven Meso-Architectured Carbon/Epoxy Composite Laminates Manufactured via Automated Fiber Placement

Karan Kodagali, Cyrus Vakili Rad, Subramani Sockalingam

Journal of Composites Science · 23.04.2026 · 10 (5) · 222

DOI: 10.3390/jcs10050222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 23.04.2026. Verfasst von Karan Kodagali und 2 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Boeing.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid composite laminates combining pseudo-woven meso-architectured composite (MAC) and unidirectional (UD) sub-laminates manufactured via automated fiber (AFP) placement are attractive as they combine the increased toughness of MAC and higher stiffness of UD while also reducing the manufacturing time. MACs are manufactured via a modified AFP process involving tow skips to create a woven-like architecture using unidirectional tows and introduce shallow crimp angles and complex fiber angle distributions in the architecture. Previous studies on hybrid MAC laminates have shown increased impact damage resistance/tolerance under high- and low-velocity impacts. This work presents an experimental study on the open-hole tension (OHT) and open-hole compression (OHC) response of T800-SC-24k carbon/epoxy laminates of nominal thickness 4.55 mm manufactured via AFP manufacturing. Two hybrid laminate configurations consisting of a UD core and pseudo-woven MAC sub-laminates on the outer surfaces are compared against a traditional UD quasi-isotropic control laminate. One of the hybrid laminate configurations has a plain-woven-like architecture while the other has a complex 3D woven type architecture. The hybrid laminates exhibited a marginal 7% increase in OHT strength and up to a 16% reduction in normal loading direction strains around the hole relative to the control. All three configurations showed comparable OHC strengths. Despite the complex meso-architecture of the MAC sub-laminates, failure in both OHT and OHC is found to be governed primarily by the UD core, which dominates load-carrying capability and failure mechanisms. The results demonstrate that the hybrid laminates maintained or improved in-plane OHT/OHC performance while previously demonstrating better damage resistance and tolerance under impact.

Förderung

  • Boeing

Zitieren

APA

Kodagali, K., Rad, C. V., & Sockalingam, S. (2026). Open-Hole Tension/Compression Response of Hybrid Pseudo-Woven Meso-Architectured Carbon/Epoxy Composite Laminates Manufactured via Automated Fiber Placement. Journal of Composites Science, 10(5), 222. https://doi.org/10.3390/jcs10050222

Vancouver

Kodagali K, Rad CV, Sockalingam S. Open-Hole Tension/Compression Response of Hybrid Pseudo-Woven Meso-Architectured Carbon/Epoxy Composite Laminates Manufactured via Automated Fiber Placement. Journal of Composites Science. 2026;10(5):222. doi:10.3390/jcs10050222

BibTeX
@article{Kodagali2026,
  author = {Kodagali, Karan and Rad, Cyrus Vakili and Sockalingam, Subramani},
  title = {Open-Hole Tension/Compression Response of Hybrid Pseudo-Woven Meso-Architectured Carbon/Epoxy Composite Laminates Manufactured via Automated Fiber Placement},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {5},
  pages = {222},
  doi = {10.3390/jcs10050222}
}
Kostenlos starten →