Influence of Curing Profile on Residual Stress Distribution and Fracture Toughness in Carbon-Fiber/Epoxy Composites
Journal of Composites Science · 10.04.2026 · 10 (4) · 206
DOI: 10.3390/jcs10040206 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 10.04.2026. Verfasst von Arash Ramian und 2 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the residual stresses developed during the curing process of polymer fiber-reinforced composites and their influence on fracture behavior, particularly the initiation and propagation of interlaminar cracks. The main objective is to quantify how different curing histories, including incomplete cure, alter the spatial distribution of residual stresses and, in turn, affect the mode-I fracture response of carbon-fiber/epoxy laminates. A transient thermal–structural finite element framework incorporating an autocatalytic cure kinetics model was used to simulate the curing process and predict residual stress development in a unidirectional carbon-fiber/epoxy laminate with an edge crack, considering thermal, chemical, and geometric effects. The cure model was calibrated using isothermal differential scanning calorimetry data to determine the degree of cure under different thermal conditions. The key novelty of this work is the integration of a validated cure-kinetics-based curing simulation with fracture analysis, enabling direct correlation of thermal history and degree of cure with spatially varying residual stresses at the crack front and their effect on fracture toughness. Numerical load–displacement predictions were compared with double cantilever beam experimental results and showed good agreement for the curing profiles examined. The results demonstrate that residual stresses generated by different cure cycles, including hold conditions and incomplete curing, significantly influence fracture toughness. In particular, the incomplete-cure profile produced an approximately 40% reduction in toughness compared with profiles that achieved complete cure, highlighting the importance of cure history in determining final structural performance.
Zitieren
APA
Ramian, A., Amer, A., & Elhajjar, R. (2026). Influence of Curing Profile on Residual Stress Distribution and Fracture Toughness in Carbon-Fiber/Epoxy Composites. Journal of Composites Science, 10(4), 206. https://doi.org/10.3390/jcs10040206
Vancouver
Ramian A, Amer A, Elhajjar R. Influence of Curing Profile on Residual Stress Distribution and Fracture Toughness in Carbon-Fiber/Epoxy Composites. Journal of Composites Science. 2026;10(4):206. doi:10.3390/jcs10040206
BibTeX
@article{Ramian2026,
author = {Ramian, Arash and Amer, Ahmad and Elhajjar, Rani},
title = {Influence of Curing Profile on Residual Stress Distribution and Fracture Toughness in Carbon-Fiber/Epoxy Composites},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {4},
pages = {206},
doi = {10.3390/jcs10040206}
}
EUVIMED