EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Notch Sensitivity of Carbon Fibre-Reinforced Polymer Laminates with Different Stacking Sequences

Juan Luis Martínez Vicente, Miguel Ángel Caminero Torija, Juan José López Cela

Journal of Composites Science · 05.04.2026 · 10 (4) · 196

DOI: 10.3390/jcs10040196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 05.04.2026. Verfasst von Juan Luis Martínez Vicente und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science, Innovation, and Universities, Castilla-La Mancha Community Council, University of Castilla-La Mancha.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite materials have traditionally been employed in the aerospace sector due to their ability to withstand highly demanding service conditions. In recent years, their application has expanded significantly into other engineering domains, including wind energy, shipbuilding, and the automotive industry. The design of composite structures often involves geometric discontinuities, such as cut-outs for access or fastener holes for mechanical joining, which typically become critical regions under load. Consequently, the stress concentrations induced by notches represent a major concern, as they can lead to substantial reductions in strength compared with unnotched laminates. A comprehensive understanding of the behaviour of notched specimens is therefore essential for the design of complex composite assemblies, where components are commonly joined using bolts and rivets. The objective of this study is to examine the tensile response and notch sensitivity of carbon fibre-reinforced polymer (CFRP) laminates with different stacking sequences, through a comparative analysis of unnotched and open-hole specimens. A central circular hole was introduced to reproduce the geometric discontinuities frequently encountered in structural applications, enabling a detailed assessment of stress concentration effects. The experimental results indicate that unidirectional laminates exhibit the highest sensitivity to notches, whereas quasi-isotropic configurations among the multidirectional laminates display the most pronounced reduction in strength, approaching 50%. Moreover, the Point Stress Criterion (PSC) and the Average Stress Criterion (ASC) were employed to determine the characteristic lengths of the specimens, revealing significant differences among the values obtained for each lay-up configuration. Overall, the findings highlight the strong influence of stacking sequence on the mechanical response of notched CFRP laminates and underscore the need to further refine existing failure criteria to accommodate novel laminate architectures, including Bouligand-type helicoidal bioinspired stacking sequences.

Förderung

  • Spanish Ministry of Science, Innovation, and Universities
  • Castilla-La Mancha Community Council
  • University of Castilla-La Mancha

Zitieren

APA

Vicente, J. L. M., Torija, M. Á. C., & Cela, J. J. L. (2026). Notch Sensitivity of Carbon Fibre-Reinforced Polymer Laminates with Different Stacking Sequences. Journal of Composites Science, 10(4), 196. https://doi.org/10.3390/jcs10040196

Vancouver

Vicente JLM, Torija MÁC, Cela JJL. Notch Sensitivity of Carbon Fibre-Reinforced Polymer Laminates with Different Stacking Sequences. Journal of Composites Science. 2026;10(4):196. doi:10.3390/jcs10040196

BibTeX
@article{Vicente2026,
  author = {Vicente, Juan Luis Martínez and Torija, Miguel Ángel Caminero and Cela, Juan José López},
  title = {Notch Sensitivity of Carbon Fibre-Reinforced Polymer Laminates with Different Stacking Sequences},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {4},
  pages = {196},
  doi = {10.3390/jcs10040196}
}
Kostenlos starten →