Effects of Welding Parameters and Film Thickness on the Joint Performance of CF/PA6 Resistance Welding with Perforated Stainless-Steel Mesh
Journal of Composites Science · 27.03.2026 · 10 (4) · 181
DOI: 10.3390/jcs10040181 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 27.03.2026. Verfasst von Shiyuan Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China https://ror.org/01h0zpd94.
Abstract (Originalsprache)
Thermoplastic composite resistance welding boasts stable process, low cost and reliable quality, making it a dependable joining technique for such materials. This process employs a heating element (HE) as the sole heat source and therefore, it is critical in controlling the welding process. This study proposed a perforated stainless-steel mesh (SSM) as the HE and investigated the effect of welding parameters and insulation film thickness on the joint performance of resistance welded carbon-fiber-reinforced polyamide 6 (CF/PA6). The results showed that the joint lap shear strength (LSS) increased first then decreased as the welding pressure, welding time and welding current increased. The maximum LSS reached 24.4 MPa when 0.2-mm-thick films were used. The joint failure mode was identified as blocky fiber peeling with compromised fiber continuity for the joints welded with 0.1-mm-thick and 0.3 mm-thick PA6 films. For the joints made with 0.2-mm-thick PA6 films, the joint failure mode was characterized by resin peeling from the fiber surface.
Förderung
- National Natural Science Foundation of China https://ror.org/01h0zpd94
Zitieren
APA
Wang, S., Yang, Y., Geng, Z., Ao, S., & Li, Y. (2026). Effects of Welding Parameters and Film Thickness on the Joint Performance of CF/PA6 Resistance Welding with Perforated Stainless-Steel Mesh. Journal of Composites Science, 10(4), 181. https://doi.org/10.3390/jcs10040181
Vancouver
Wang S, Yang Y, Geng Z, Ao S, Li Y. Effects of Welding Parameters and Film Thickness on the Joint Performance of CF/PA6 Resistance Welding with Perforated Stainless-Steel Mesh. Journal of Composites Science. 2026;10(4):181. doi:10.3390/jcs10040181
BibTeX
@article{Wang2026,
author = {Wang, Shiyuan and Yang, Yuanduo and Geng, Zhanyi and Ao, Sansan and Li, Yang},
title = {Effects of Welding Parameters and Film Thickness on the Joint Performance of CF/PA6 Resistance Welding with Perforated Stainless-Steel Mesh},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {4},
pages = {181},
doi = {10.3390/jcs10040181}
}
EUVIMED