Alloy Glass-Derived Composites in the System of Zr-Pd-Pt-Ce for Catalytic Soot Oxidation
Journal of Composites Science · 05.03.2026 · 10 (3) · 137
DOI: 10.3390/jcs10030137 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 05.03.2026. Verfasst von Masakuni Ozawa und 5 weiteren Autor:innen. Die Arbeit nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Projects of Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development, Joint Inverse Innovation for Materials Architecture (DEJI2MA) of the Ministry of Education, Culture, Sports, Science and Technology, Japan, apan Society for the Promotion of Science.
Abstract (Originalsprache)
This study investigates the formation and soot removal properties of four composite materials derived from alloy glasses in the system of Zr-Pd-Pt-Ce. Amorphous Zr65Pd35, Zr65Pd30Pt5, Zr60Pd35Ce5, and Zr60Pd30Pt5Ce5 were subjected to a heat treatment at 800 °C for 3 h in air, resulting in the formation of composites containing PdO, Pd and a mixture of tetragonal and monoclinic ZrO2 phases. Their microstructure was identified as composites in which PdO (Pd) precipitates are were dispersed in a ZrO2 matrix. The oxidation of soot over the composites was initiated at lower temperatures, reaching the completion of removal at approximately 600 °C, which was superior to that of non-catalytic soot combustion. The sequence in which the removal temperatures decreased was as follows: Zr65Pd35 > Zr60Pd35Ce5 > Zr60Pd25Pt5Ce5 > Zr65Pd30Pt5. The microstructure emerges as the predominant factor influencing soot oxidation activity, where the oxidation reaction rate was mainly governed by the interface length between PdO and ZrO2. The present results identified a novel bulk-type catalytic composite material, which was derived by a simple process from alloy glasses for the purpose of low-temperature soot oxidation.
Förderung
- Projects of Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development
- Joint Inverse Innovation for Materials Architecture (DEJI2MA) of the Ministry of Education, Culture, Sports, Science and Technology, Japan
- apan Society for the Promotion of Science
Zitieren
APA
Ozawa, M., Nakamura, M., Masuda, A., Katsuragawa, N., Hattori, M., & Kato, H. (2026). Alloy Glass-Derived Composites in the System of Zr-Pd-Pt-Ce for Catalytic Soot Oxidation. Journal of Composites Science, 10(3), 137. https://doi.org/10.3390/jcs10030137
Vancouver
Ozawa M, Nakamura M, Masuda A, Katsuragawa N, Hattori M, Kato H. Alloy Glass-Derived Composites in the System of Zr-Pd-Pt-Ce for Catalytic Soot Oxidation. Journal of Composites Science. 2026;10(3):137. doi:10.3390/jcs10030137
BibTeX
@article{Ozawa2026,
author = {Ozawa, Masakuni and Nakamura, Maki and Masuda, Atsuhiko and Katsuragawa, Naoya and Hattori, Masatomo and Kato, Hidemi},
title = {Alloy Glass-Derived Composites in the System of Zr-Pd-Pt-Ce for Catalytic Soot Oxidation},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {3},
pages = {137},
doi = {10.3390/jcs10030137}
}
EUVIMED