Advances in 3D Printing Applications for Personalized Orthopedic Surgery: From Anatomical Modeling to Patient-Specific Implants
Journal of Clinical Medicine · 05.06.2025 · 14 (11) · 3989
DOI: 10.3390/jcm14113989 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Journal of Clinical Medicine, online erschienen am 05.06.2025. Verfasst von Marcin Prządka und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics and Movement Traumatology, Provincial Integrated Hospital, Szpitalna 45, 62-504 Konin, Poland. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Three-dimensional (3D) printing has gained substantial interest among scientists and surgeons over the past decade due to its broad potential in medical applications. Its clinical utility has been increasingly recognized, demonstrating promising outcomes for patient care. Currently, 3D printing technology enables surgeons to enhance operative precision by facilitating the creation of patient-specific anatomical models, customized implants, biological tissues, and even surgical instruments. This personalization contributes to improved surgical outcomes, reduced operative times, and shorter postoperative recovery periods. Furthermore, 3D printing significantly aids in the customization of prostheses to conform closely to individual anatomical structures. Beyond therapeutic applications, 3D printing serves as a valuable educational tool in medical training. It enhances case-specific visualization, elucidates fracture mechanisms, and provides tangible models for simulation-based practice. Although the use of 3D printing might be seen as useful mostly in orthopedics, it has expanded into multiple medical specialties, including plastic surgery, dentistry, and emergency medicine. Presently, 3D-printed constructs are routinely employed for preoperative planning, prosthetic development, fracture management, and the fabrication of patient-specific surgical tools. Futuristically, the integration of 3D printing into clinical practice is expected to play a pivotal role in the advancement of personalized medicine, offering substantial benefits for both healthcare providers and patients.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Orthopedics and Movement Traumatology, Provincial Integrated Hospital, Szpitalna 45, 62-504 Konin, Poland.
- Department of Correct, Clinical and Imaging Anatomy, Medical University of Lublin, ul. Jaczewskiego 4, 20-090 Lublin, Poland.
- Department of Forensic Medicine, Medical University of Lublin, Jaczewskiego 8b, 20-090 Lublin, Poland.
- Department of Machine Design and Mechatronics, Faculty of 1 Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland.
- Institute of Medical Sciences, The John Paul II Catholic University of Lublin, ul. Konstantynów 1H, 20-708 Lublin, Poland.
ORCID-Profile: Weronika Pająk, Jakub Kleinrok, Joanna Pec, Karolina Michno, Jacek Baj
Zitieren
APA
Prządka, M., Pająk, W., Kleinrok, J., Pec, J., Michno, K., Karpiński, R., & Baj, J. (2025). Advances in 3D Printing Applications for Personalized Orthopedic Surgery: From Anatomical Modeling to Patient-Specific Implants. Journal of Clinical Medicine, 14(11), 3989. https://doi.org/10.3390/jcm14113989
Vancouver
Prządka M, Pająk W, Kleinrok J, Pec J, Michno K, Karpiński R, et al. Advances in 3D Printing Applications for Personalized Orthopedic Surgery: From Anatomical Modeling to Patient-Specific Implants. Journal of Clinical Medicine. 2025;14(11):3989. doi:10.3390/jcm14113989
BibTeX
@article{Przdka2025,
author = {Prządka, Marcin and Pająk, Weronika and Kleinrok, Jakub and Pec, Joanna and Michno, Karolina and Karpiński, Robert and Baj, Jacek},
title = {Advances in 3D Printing Applications for Personalized Orthopedic Surgery: From Anatomical Modeling to Patient-Specific Implants},
journal = {Journal of Clinical Medicine},
year = {2025},
volume = {14},
number = {11},
pages = {3989},
doi = {10.3390/jcm14113989}
}
EUVIMED