EUVIMEDEUVIMED entdecken
Systematische ÜbersichtOpen Access · CC BY 4.0

3D Printing for Customized Bone Reconstruction in Spheno-Orbital Meningiomas: A Systematic Literature Review and Institutional Experience

Simona Serioli, Alberto Pietrantoni iD, Alberto Benato iD, Marco Galeazzi iD, Amedeo Piazza iD, Liverana Lauretti iD, Pier Paolo Mattogno iD, Alessandro Olivi, Marco Maria Fontanella iD, Francesco Doglietto iD

Journal of Clinical Medicine · 06.07.2024 · 13 (13) · 3968

DOI: 10.3390/jcm13133968 ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift Journal of Clinical Medicine, online erschienen am 06.07.2024. Verfasst von Simona Serioli und 9 weiteren Autor:innen. Beteiligte Einrichtung: Division of Neurosurgery, Department of Medical and Surgical Specialties, Radiological Sciences, and Public Health, Spedali Civili of Brescia, Univer…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The treatment of spheno-orbital meningiomas (SOMs) requires extensive bone resections, creating significant defects in a complex geometrical space. Bone reconstruction represents a fundamental step that optimizes long-term aesthetic and functional outcomes. In recent years, 3D printing technology has also been exploited for complex skull base reconstructions, but reports remain scarce.

Methods

We retrospectively analyzed four consecutive patients who underwent SOM resection and one-step 3D PEEK customized reconstruction from 2019 to 2023. A systematic review of 3D printing customized implants for SOM was then performed.

Results

All patients underwent a frontotemporal craniotomy, removal of SOM, and reconstruction of the superolateral orbital wall and pterional region. The aesthetic outcome was extremely satisfactory in all cases. No orbital implant malposition or infectious complications were documented. Eleven papers were included in the literature review, describing 27 patients. Most (23) patients underwent a single-stage reconstruction; in three cases, the implant was positioned to correct postoperative delayed enophthalmos. Porous titanium was the most used material (16 patients), while PEEK was used in three cases. Prosthesis malposition was described in two (7.4%) patients.

Conclusions

Single-step reconstruction with a personalized 3D PEEK prosthesis represents a valid reconstruction technique for the treatment of SOMs with good aesthetic outcomes.

Schlagwörter

Stichwörter der Autor:innen

3D printing customized prosthesiscustom cranial implantcustomized reconstructionskull basespheno-orbital meningiomasspheno-orbital reconstruction

Autor:innen und Institutionen

  • Division of Neurosurgery, Department of Medical and Surgical Specialties, Radiological Sciences, and Public Health, Spedali Civili of Brescia, University of Brescia, 25123 Brescia, Italy.
  • Department of Neurosurgery, Fondazione Policlinico Universitario Agostino Gemelli IRCCS, 00168 Rome, Italy.
  • Pathology Unit, Spedali Civili of Brescia, University of Brescia, 25123 Brescia, Italy.
  • Neurosurgery Division, Department of Neuroscience, "Sapienza" University of Rome, 00185 Rome, Italy.
  • Neurosurgery, School of Medicine, Università Cattolica del Sacro Cuore, 00168 Rome, Italy.

ORCID-Profile: Alberto Pietrantoni, Alberto Benato, Marco Galeazzi, Amedeo Piazza, Liverana Lauretti, Pier Paolo Mattogno, Marco Maria Fontanella, Francesco Doglietto

Zitieren

APA

Serioli, S., Pietrantoni, A., Benato, A., Galeazzi, M., Piazza, A., Lauretti, L., Mattogno, P. P., Olivi, A., Fontanella, M. M., & Doglietto, F. (2024). 3D Printing for Customized Bone Reconstruction in Spheno-Orbital Meningiomas: A Systematic Literature Review and Institutional Experience. Journal of Clinical Medicine, 13(13), 3968. https://doi.org/10.3390/jcm13133968

Vancouver

Serioli S, Pietrantoni A, Benato A, Galeazzi M, Piazza A, Lauretti L, et al. 3D Printing for Customized Bone Reconstruction in Spheno-Orbital Meningiomas: A Systematic Literature Review and Institutional Experience. Journal of Clinical Medicine. 2024;13(13):3968. doi:10.3390/jcm13133968

BibTeX
@article{Serioli2024,
  author = {Serioli, Simona and Pietrantoni, Alberto and Benato, Alberto and Galeazzi, Marco and Piazza, Amedeo and Lauretti, Liverana and Mattogno, Pier Paolo and Olivi, Alessandro and Fontanella, Marco Maria and Doglietto, Francesco},
  title = {3D Printing for Customized Bone Reconstruction in Spheno-Orbital Meningiomas: A Systematic Literature Review and Institutional Experience},
  journal = {Journal of Clinical Medicine},
  year = {2024},
  volume = {13},
  number = {13},
  pages = {3968},
  doi = {10.3390/jcm13133968}
}
Kostenlos starten →