Design, Development, and Validation of an Initial Engineering Model for KSU-SAT, a 1P PocketQube
J · 14.11.2026 · 9 (4) · 36
DOI: 10.3390/j9040036 ↗Kurz gefasst
Fachartikel in der Zeitschrift J, online erschienen am 14.11.2026. Verfasst von Carrington Chun und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
To support the educational and technical developmental pipeline for future nanosatellite development, this research presents the design, development, and validation of an engineering model for KSU’s first 1p PocketQube. The development of the engineering model first explores the expansion of the existing CricketSat paradigm to the PocketQube domain. Major design revisions to the existing CricketSat architecture were undertaken, including the reformatting of the circuit to fit within a 1p PocketQube chassis as well as analysis of the updated circuit design under differing supply voltages and antenna configurations. Additional communication validation was also conducted with a digital radio paradigm. This digital communication paradigm utilized the RFM69 chip set and was trialed with a number of both commercial antennas and custom collapsible antennas to assess the gain characteristics of the custom antennas. Beyond the Communication and Data Handling (CDH) subsystem, the development of the Electrical Power Subsystem (EPS) is also described and validated with the radio architecture. Furthermore, these systems were successfully integrated into a custom mechanical frame that satisfied all necessary design constrains for a commercial small-sat launch provider, validating the potential maturity of the engineering model for full orbital deployment. A final thermal-vacuum test was also conducted to confirm the robustness of the design and to demonstrate similar dynamic conditions expected in the potential orbital launch.
Zitieren
APA
Chun, C., Battu, L., More, A., Chowdhoury, F. A., Haghighat-Grami, S., & Tanveer, M. H. (2026). Design, Development, and Validation of an Initial Engineering Model for KSU-SAT, a 1P PocketQube. J, 9(4), 36. https://doi.org/10.3390/j9040036
Vancouver
Chun C, Battu L, More A, Chowdhoury FA, Haghighat-Grami S, Tanveer MH. Design, Development, and Validation of an Initial Engineering Model for KSU-SAT, a 1P PocketQube. J. 2026;9(4):36. doi:10.3390/j9040036
BibTeX
@article{Chun2026,
author = {Chun, Carrington and Battu, Lakshay and More, Aaditya and Chowdhoury, Faysal A. and Haghighat-Grami, Saam and Tanveer, M. Hassan},
title = {Design, Development, and Validation of an Initial Engineering Model for KSU-SAT, a 1P PocketQube},
journal = {J},
year = {2026},
volume = {9},
number = {4},
pages = {36},
doi = {10.3390/j9040036}
}
EUVIMED