Optimization of Autoclave Reactors to Improve Bearing Life Using the Taguchi Method and the Response Surface Methodology
Inventions · 10.11.2023 · 8 (6) · 144
DOI: 10.3390/inventions8060144 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inventions, online erschienen am 10.11.2023. Verfasst von Farghani Fariz und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council (NSTC), Taiwan, Intelligent Manufacturing Innovation Center (IMIC).
Abstract (Originalsprache)
Plastic pervasiveness in daily life has increased in tandem with population growth. Ethylene–vinyl acetate (EVA) is emerging as a popular compound for manufacturing plastic, which is obtained from ethylene and vinyl acetate synthesis. EVA is produced using autoclave reactors, which often encounter bearing damage under specific operating conditions. This research aims to optimize the parameters in autoclave reactors to enhance bearing life. The study focuses on two crucial factors: the number of impellers and the temperature, with bearing life as the response variable. Simulations using finite-element analysis were conducted to obtain the fatigue life of bearings and validated using real-time company data stating the damage of bearings within 80 days. The optimization process employed the Taguchi method (TM) and the response surface methodology (RSM). A comparison of these techniques revealed that temperature had the most significant influence on the response. Interestingly, both methods yielded the same optimal parameters: seven impellers and a temperature of 150 °C. The simulation results using these optimized parameters demonstrated a noteworthy 3.095% increase in bearing life compared to the initial design. The RSM outperformed the Taguchi method in accurately predicting response values with minimum prediction error under optimal conditions.
Förderung
- National Science and Technology Council (NSTC), Taiwan
- Intelligent Manufacturing Innovation Center (IMIC)
Zitieren
APA
Fariz, F., Patel, B., Chiu, H., Pan, S., Chen, C., Lee, H., & Lin, P. T. (2023). Optimization of Autoclave Reactors to Improve Bearing Life Using the Taguchi Method and the Response Surface Methodology. Inventions, 8(6), 144. https://doi.org/10.3390/inventions8060144
Vancouver
Fariz F, Patel B, Chiu H, Pan S, Chen C, Lee H, et al. Optimization of Autoclave Reactors to Improve Bearing Life Using the Taguchi Method and the Response Surface Methodology. Inventions. 2023;8(6):144. doi:10.3390/inventions8060144
BibTeX
@article{Fariz2023,
author = {Fariz, Farghani and Patel, Brijesh and Chiu, Hsien-Cheng and Pan, Shih-Jie and Chen, Cheng-Liang and Lee, Hao-Yeh and Lin, Po Ting},
title = {Optimization of Autoclave Reactors to Improve Bearing Life Using the Taguchi Method and the Response Surface Methodology},
journal = {Inventions},
year = {2023},
volume = {8},
number = {6},
pages = {144},
doi = {10.3390/inventions8060144}
}
EUVIMED