EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Cost Pulsed Spray Pyrolysis Synthesis of ZnO-rGO and F-Doped SnO2 Thin Films

Seham K. Abdel-Aal, Mohamed F. Kandeel, Raghda Sabry, Maxim Ganchev, Stanka Spasova, Abdallah Dayhoum, Ahmed S. Abdel-Rahman

Inventions · 05.08.2026 · 11 (4) · 82

DOI: 10.3390/inventions11040082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inventions, online erschienen am 05.08.2026. Verfasst von Seham K. Abdel-Aal und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ASRT-BAS.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present work, graphene-modified zinc oxide (ZnO-rGO) and fluorine-doped tin oxide (FTO) thin films were successfully fabricated using a simple, low-cost pulsed spray pyrolysis technique. The structural, morphological, optical, electrical, and surface electronic properties of the deposited films were systematically characterized. X-ray diffraction (XRD) analysis confirmed the formation of polycrystalline ZnO- and SnO2-based phases with crystallite sizes in the nanometer range. The crystallographic parameters, microstrain, and dislocation density of the deposited films were found to be influenced by the incorporation of reduced graphene oxide (rGO) and fluorine dopants. Scanning electron microscopy (SEM) revealed compact and homogeneous surface morphologies with good film coverage and well-defined nanocrystalline features. Optical characterization demonstrated the wide-bandgap semiconducting behavior of the deposited films, with optical bandgap energies ranging from 3.262 to 3.312 eV for the ZnO-rGO films and from 3.91 to 4.01 eV for the FTO films. Kelvin probe measurements yielded work-function values in the range of approximately 5.0–5.2 eV, indicating favorable surface electronic characteristics suitable for optoelectronic applications. Furthermore, fluorine incorporation enhanced the dielectric response of the SnO2 films, particularly in the low-frequency region owing to increased interfacial polarization effects. The obtained results demonstrate that pulsed spray pyrolysis provides a simple, cost-effective, and efficient route for fabricating ZnO-rGO and FTO thin films with desirable structural, optical, electrical, and surface electronic properties. These findings highlight the considerable potential of the developed materials for transparent electrodes and a wide range of optoelectronic applications.

Förderung

  • ASRT-BAS

Zitieren

APA

Abdel-Aal, S. K., Kandeel, M. F., Sabry, R., Ganchev, M., Spasova, S., Dayhoum, A., & Abdel-Rahman, A. S. (2026). Low-Cost Pulsed Spray Pyrolysis Synthesis of ZnO-rGO and F-Doped SnO2 Thin Films. Inventions, 11(4), 82. https://doi.org/10.3390/inventions11040082

Vancouver

Abdel-Aal SK, Kandeel MF, Sabry R, Ganchev M, Spasova S, Dayhoum A, et al. Low-Cost Pulsed Spray Pyrolysis Synthesis of ZnO-rGO and F-Doped SnO2 Thin Films. Inventions. 2026;11(4):82. doi:10.3390/inventions11040082

BibTeX
@article{AbdelAal2026,
  author = {Abdel-Aal, Seham K. and Kandeel, Mohamed F. and Sabry, Raghda and Ganchev, Maxim and Spasova, Stanka and Dayhoum, Abdallah and Abdel-Rahman, Ahmed S.},
  title = {Low-Cost Pulsed Spray Pyrolysis Synthesis of ZnO-rGO and F-Doped SnO2 Thin Films},
  journal = {Inventions},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {82},
  doi = {10.3390/inventions11040082}
}
Kostenlos starten →