Multi-Level Power Output for Wireless Power Transfer System Based on Hardware Reuse and Inverter Mode Selection at Primary Side
Inventions · 02.07.2026 · 11 (4) · 69
DOI: 10.3390/inventions11040069 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inventions, online erschienen am 02.07.2026. Verfasst von Mingshen Wang und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Project of State Grid Jiangsu Electric Power Co., Ltd..
Abstract (Originalsprache)
To satisfy the requirements of multi-level power output in wireless power transfer (WPT) systems, this paper proposes a multi-level power regulation strategy based on primary-side hardware reuse and inverter mode selection. The proposed approach reduces hardware complexity and control difficulty under diverse power demands, while eliminating the performance degradation of inverters induced by wide-range duty-cycle modulation. In this study, the configuration of the established system is first presented. Maintaining the inherent output connection of the full-bridge inverter, two operational modes realized via power device gating control are analyzed and deduced. On this basis, an analytical circuit model is constructed for the multi-level power output system incorporating primary-side hardware reuse, and the corresponding static characteristics of the system are investigated. Combined with the application of receiving coils with different specifications, a refined multi-level power output scheme relying on inverter mode selection is further formulated. Finally, experimental validation demonstrates that the prototype system achieves four discrete power levels simply through primary-side hardware reuse and mode switching, without modifying circuit connections or adjusting duty ratios. The maximum received power under each level reaches 405 W, 212 W, 101 W and 51 W, respectively; meanwhile, the corresponding DC–DC efficiency is maintained at 92.6%, 91.5%, 92.3% and 90.92%.
Förderung
- Science and Technology Project of State Grid Jiangsu Electric Power Co., Ltd.
Zitieren
APA
Wang, M., Yuan, X., Miao, H., Han, H., & Liu, H. (2026). Multi-Level Power Output for Wireless Power Transfer System Based on Hardware Reuse and Inverter Mode Selection at Primary Side. Inventions, 11(4), 69. https://doi.org/10.3390/inventions11040069
Vancouver
Wang M, Yuan X, Miao H, Han H, Liu H. Multi-Level Power Output for Wireless Power Transfer System Based on Hardware Reuse and Inverter Mode Selection at Primary Side. Inventions. 2026;11(4):69. doi:10.3390/inventions11040069
BibTeX
@article{Wang2026,
author = {Wang, Mingshen and Yuan, Xiaodong and Miao, Huiyu and Han, Huachun and Liu, Han},
title = {Multi-Level Power Output for Wireless Power Transfer System Based on Hardware Reuse and Inverter Mode Selection at Primary Side},
journal = {Inventions},
year = {2026},
volume = {11},
number = {4},
pages = {69},
doi = {10.3390/inventions11040069}
}
EUVIMED