EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Evaluation of Equivalent Stress Intensity Factor Models under Mixed-Mode (I+II) Loading

Estefanía Gómez-Gamboa, Jorge Guillermo Díaz-Rodríguez, Jairo Andrés Mantilla-Villalobos, Oscar Rodolfo Bohórquez-Becerra, Manuel del Jesús Martínez

Infrastructures · 01.03.2024 · 9 (3) · 45

DOI: 10.3390/infrastructures9030045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 01.03.2024. Verfasst von Estefanía Gómez-Gamboa und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study determines the equivalent stress intensity factor (SIF) model that best fits the experimental behavior of low-carbon steel under mixed modes (I and II). The study assessed Tanaka, Richard, and Pook’s equivalent SIF models. The theoretical values used for comparison correspond to the experimental results in a modified C(T) geometry by machining a hole ahead of the crack tip subjected to fatigue loads with a load ratio of R = 0.1. The comparison involved the SIF for six experimental points and the values computed through the numerical simulation. The Paris, Klesnil, and Modified Forman–Newman crack growth models were used with each equivalent SIF to analyze the prediction in the estimated number of cycles. The Klesnil model showed the closest prediction since the error between the calculated and experimentally recorded number of cycles is the lowest. However, the material behavior reflects a reduced crack propagation rate attributed to plasticity in the crack tip. The results suggest that Asaro equivalent SIF conservatively estimates the element lifespan with increasing errors from 2.3% at the start of growth to 27% at the end of the calculation. This study sheds light on the accuracy and limitations of different equivalent SIF models, providing valuable insights for structural integrity assessments in engineering applications.

Zitieren

APA

Gómez-Gamboa, E., Díaz-Rodríguez, J. G., Mantilla-Villalobos, J. A., Bohórquez-Becerra, O. R., & Martínez, M. D. J. (2024). Experimental and Numerical Evaluation of Equivalent Stress Intensity Factor Models under Mixed-Mode (I+II) Loading. Infrastructures, 9(3), 45. https://doi.org/10.3390/infrastructures9030045

Vancouver

Gómez-Gamboa E, Díaz-Rodríguez JG, Mantilla-Villalobos JA, Bohórquez-Becerra OR, Martínez MDJ. Experimental and Numerical Evaluation of Equivalent Stress Intensity Factor Models under Mixed-Mode (I+II) Loading. Infrastructures. 2024;9(3):45. doi:10.3390/infrastructures9030045

BibTeX
@article{GmezGamboa2024,
  author = {Gómez-Gamboa, Estefanía and Díaz-Rodríguez, Jorge Guillermo and Mantilla-Villalobos, Jairo Andrés and Bohórquez-Becerra, Oscar Rodolfo and Martínez, Manuel del Jesús},
  title = {Experimental and Numerical Evaluation of Equivalent Stress Intensity Factor Models under Mixed-Mode (I+II) Loading},
  journal = {Infrastructures},
  year = {2024},
  volume = {9},
  number = {3},
  pages = {45},
  doi = {10.3390/infrastructures9030045}
}
Kostenlos starten →