Railway Bridge Geometry Assessment Supported by Cutting-Edge Reality Capture Technologies and 3D As-Designed Models
Infrastructures · 20.07.2023 · 8 (7) · 114
DOI: 10.3390/infrastructures8070114 ↗Kurz gefasst
Fachartikel in der Zeitschrift Infrastructures, online erschienen am 20.07.2023. Verfasst von Rafael Cabral und 6 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Base Funding, Programmatic Funding, ISISE.
Abstract (Originalsprache)
Documentation of structural visual inspections is necessary for its monitoring, maintenance, and decision about its rehabilitation, and structural strengthening. In recent times, close-range photogrammetry (CRP) based on unmanned aerial vehicles (UAVs) and terrestrial laser scanners (TLS) have greatly improved the survey phase. These technologies can be used independently or in combination to provide a 3D as-is image-based model of the railway bridge. In this study, TLS captured the side and bottom sections of the deck, while the CRP-based UAV captured the side and top sections of the deck, and the track. The combination of post-processing techniques enabled the merging of TLS and CRP models, resulting in the creation of an accurate 3D representation of the complete railway bridge deck. Additionally, a 3D as-designed model was developed based on the design plans of the bridge. The as-designed model is compared to the as-is model through a 3D digital registration. The comparison allows the detection of dimensional deviation and surface alignments. The results reveal slight deviations in the structural dimension with a global average value of 9 mm.
Förderung
- Base Funding
- Programmatic Funding
- ISISE
- ARISE
- Portuguese Science Foundation
- bilateral agreement FCT-NAWA
- European Regional Development Fund
- Recovery and Resilience Plan
Zitieren
APA
Cabral, R., Oliveira, R., Ribeiro, D., Rakoczy, A. M., Santos, R., Azenha, M., & Correia, J. (2023). Railway Bridge Geometry Assessment Supported by Cutting-Edge Reality Capture Technologies and 3D As-Designed Models. Infrastructures, 8(7), 114. https://doi.org/10.3390/infrastructures8070114
Vancouver
Cabral R, Oliveira R, Ribeiro D, Rakoczy AM, Santos R, Azenha M, et al. Railway Bridge Geometry Assessment Supported by Cutting-Edge Reality Capture Technologies and 3D As-Designed Models. Infrastructures. 2023;8(7):114. doi:10.3390/infrastructures8070114
BibTeX
@article{Cabral2023,
author = {Cabral, Rafael and Oliveira, Rogério and Ribeiro, Diogo and Rakoczy, Anna M. and Santos, Ricardo and Azenha, Miguel and Correia, José},
title = {Railway Bridge Geometry Assessment Supported by Cutting-Edge Reality Capture Technologies and 3D As-Designed Models},
journal = {Infrastructures},
year = {2023},
volume = {8},
number = {7},
pages = {114},
doi = {10.3390/infrastructures8070114}
}
EUVIMED