EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Evaluation and Parametric Assessment of O-Grid Bracing Systems Using Rectangular and Circular Hollow Sections

K. N. Adarsha, M. Chaithra, A. R. Avinash, P. Subrahmanya V. Bhat, Radhika Sasindran

Infrastructures · 18.11.2026 · 11 (11) · 428

DOI: 10.3390/infrastructures11110428 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 18.11.2026. Verfasst von K. N. Adarsha und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Resilient infrastructure in seismic regions requires bracing systems that add stiffness, strength and energy dissipation to steel moment-resisting frames. This study evaluates O-grid circular bracing with rings of rectangular (RHSs) and circular hollow sections (CHSs). Cyclic ABAQUS analyses, checked against published tests on a bare frame and two O-grid-braced frames, compared O-grid rings of I-, H-, RHS and CHS sections at equal steel area and assessed 15 RHS and six CHS rings parametrically. The O-grid frames raised the initial stiffness of the bare frame by 5–51%, its peak load by 19–47% and its dissipated energy by about 35–80%. The RHS and I-section rings differed by less than 4% in peak load and 7% in energy; both buckled out of plane in two half-waves, by up to 109 mm (RHS) and 223 mm (I-section). Ductility at the largest imposed displacement was similar (μ ≈ 6.4–7.1). Raising the RHS aspect ratio from 1 to 3 increased the stiffness by 31% but the peak load by only 6%, with out-of-plane and distortional buckling from h/b = 2; varying the CHS D/t from 14 to 61 changed the peak load and energy by about 5%. The results quantify the trade-off between strength, stiffness and stability.

Zitieren

APA

Adarsha, K. N., Chaithra, M., Avinash, A. R., Bhat, P. S. V., & Sasindran, R. (2026). Numerical Evaluation and Parametric Assessment of O-Grid Bracing Systems Using Rectangular and Circular Hollow Sections. Infrastructures, 11(11), 428. https://doi.org/10.3390/infrastructures11110428

Vancouver

Adarsha KN, Chaithra M, Avinash AR, Bhat PSV, Sasindran R. Numerical Evaluation and Parametric Assessment of O-Grid Bracing Systems Using Rectangular and Circular Hollow Sections. Infrastructures. 2026;11(11):428. doi:10.3390/infrastructures11110428

BibTeX
@article{Adarsha2026,
  author = {Adarsha, K. N. and Chaithra, M. and Avinash, A. R. and Bhat, P. Subrahmanya V. and Sasindran, Radhika},
  title = {Numerical Evaluation and Parametric Assessment of O-Grid Bracing Systems Using Rectangular and Circular Hollow Sections},
  journal = {Infrastructures},
  year = {2026},
  volume = {11},
  number = {11},
  pages = {428},
  doi = {10.3390/infrastructures11110428}
}
Kostenlos starten →