EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Selection of Soil–Aggregate Mixtures Based on Multistage Permanent Deformation

Claudio Rafael Cicuto Landim Alves Moreira, Lisley Madeira Coelho, Sergio Neves Monteiro, Antônio Carlos Rodrigues Guimarães

Infrastructures · 12.11.2026 · 11 (11) · 419

DOI: 10.3390/infrastructures11110419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 12.11.2026. Verfasst von Claudio Rafael Cicuto Landim Alves Moreira und 3 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeicoamento de Pessoal de Nível Superior.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although mechanistic–empirical approaches have gained increasing prominence in pavement design, the evaluation and selection of soil–aggregate mixtures still frequently rely on gradation criteria and the California Bearing Ratio (CBR), which may not fully capture the behavior of these materials under repeated loading, particularly in the case of tropical lateritic soils. In this context, this study aimed to evaluate the use of permanent deformation obtained from multistage repeated-load triaxial testing as a performance-oriented tool for comparing and ranking soil–aggregate compositions. Three mixtures composed of lateritic soil and basalt aggregate (SA50-50, SA40-60, and SA30-70) were proportioned to comply with the same reference gradation envelope and evaluated through CBR, resilient modulus, and multistage permanent deformation tests. These tests were complemented by a single-stage permanent deformation test conducted under the same stress state for all three mixtures. Increasing the aggregate content increased the CBR from 61% to 144%, whereas the average resilient modulus ranged from 301 to 356 MPa, without showing a consistent increasing trend. SA40-60 exhibited the lowest permanent deformation levels along all three multistage loading paths, with final permanent strains of approximately 0.85%, 0.81%, and 2.12% for TC50, TC70, and TC100, respectively. The single-stage test showed the same overall trend as the multistage tests, with a final permanent deformation of 1.09 mm for SA40-60, compared with 2.17 mm and 3.52 mm for SA50-50 and SA30-70, respectively. The results indicate that conventional parameters and resilient response, when considered individually, do not fully describe the behavior of these mixtures with respect to the accumulation of irreversible deformation. Multistage permanent deformation testing therefore proved to be a useful tool for comparing different soil–aggregate mixtures and supporting the selection of the best-performing composition among those evaluated.

Förderung

  • Coordenação de Aperfeicoamento de Pessoal de Nível Superior

Zitieren

APA

Moreira, C. R. C. L. A., Coelho, L. M., Monteiro, S. N., & Guimarães, A. C. R. (2026). Selection of Soil–Aggregate Mixtures Based on Multistage Permanent Deformation. Infrastructures, 11(11), 419. https://doi.org/10.3390/infrastructures11110419

Vancouver

Moreira CRCLA, Coelho LM, Monteiro SN, Guimarães ACR. Selection of Soil–Aggregate Mixtures Based on Multistage Permanent Deformation. Infrastructures. 2026;11(11):419. doi:10.3390/infrastructures11110419

BibTeX
@article{Moreira2026,
  author = {Moreira, Claudio Rafael Cicuto Landim Alves and Coelho, Lisley Madeira and Monteiro, Sergio Neves and Guimarães, Antônio Carlos Rodrigues},
  title = {Selection of Soil–Aggregate Mixtures Based on Multistage Permanent Deformation},
  journal = {Infrastructures},
  year = {2026},
  volume = {11},
  number = {11},
  pages = {419},
  doi = {10.3390/infrastructures11110419}
}
Kostenlos starten →