EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ternary Gypsum–Cement–Pozzolanic Compositions for 3D Printing: Mix Design, Rheology and Long-Term Performance

Genadijs Sahmenko, Girts Bumanis, Maris Sinka, Peteris Slosbergs, Alise Sapata, Diana Bajare, Vjaceslavs Lapkovskis

Infrastructures · 28.04.2026 · 11 (5) · 153

DOI: 10.3390/infrastructures11050153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 28.04.2026. Verfasst von Genadijs Sahmenko und 6 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Latvian Council of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ternary gypsum–cement–pozzolan (GCP) binders represent a promising low-carbon alternative to traditional Portland cement-based systems for additive 3D printing (3DP). This study presents a systematic three-stage experimental framework for the development of printable and durable GCP mixtures: (i) optimisation of gypsum–cement–metakaolin binder proportions based on a ternary diagram for 25 formulations, (ii) comparative evaluation of different pozzolanic additives and secondary gypsum sources alongside comprehensive durability testing, and (iii) adaptation of the optimised mixtures for 3DP, focusing on rheological properties. The optimal composition was determined with 55 wt% gypsum, 22.5 wt% Portland cement, and 22.5 wt% metakaolin, achieving a 28-day wet compressive strength of 36.2 MPa and a softening coefficient of 0.85. Successful integration of secondary gypsum sources was demonstrated. The GCP 3DP mixtures were developed with water/binder ratios of 0.38–0.45 and sand/binder ratios of 0.5–1.4, with an open time of 20–40 min. The mixtures exhibit pronounced thixotropic behaviour, characterised by increasing yield stress over time and relatively stable plastic viscosity. Printability tests confirmed the stable application of 29–39 layers before structural buckling. 3DP under laboratory conditions successfully demonstrated the feasibility of producing architectural and structural elements from sustainable GCP compositions.

Förderung

  • Latvian Council of Science

Zitieren

APA

Sahmenko, G., Bumanis, G., Sinka, M., Slosbergs, P., Sapata, A., Bajare, D., & Lapkovskis, V. (2026). Ternary Gypsum–Cement–Pozzolanic Compositions for 3D Printing: Mix Design, Rheology and Long-Term Performance. Infrastructures, 11(5), 153. https://doi.org/10.3390/infrastructures11050153

Vancouver

Sahmenko G, Bumanis G, Sinka M, Slosbergs P, Sapata A, Bajare D, et al. Ternary Gypsum–Cement–Pozzolanic Compositions for 3D Printing: Mix Design, Rheology and Long-Term Performance. Infrastructures. 2026;11(5):153. doi:10.3390/infrastructures11050153

BibTeX
@article{Sahmenko2026,
  author = {Sahmenko, Genadijs and Bumanis, Girts and Sinka, Maris and Slosbergs, Peteris and Sapata, Alise and Bajare, Diana and Lapkovskis, Vjaceslavs},
  title = {Ternary Gypsum–Cement–Pozzolanic Compositions for 3D Printing: Mix Design, Rheology and Long-Term Performance},
  journal = {Infrastructures},
  year = {2026},
  volume = {11},
  number = {5},
  pages = {153},
  doi = {10.3390/infrastructures11050153}
}
Kostenlos starten →