Comparative Sustainability Assessment of Proprietary and Non-Proprietary Ultra-High Performance Concrete Mixtures
Infrastructures · 16.09.2025 · 10 (9) · 245
DOI: 10.3390/infrastructures10090245 ↗Kurz gefasst
Fachartikel in der Zeitschrift Infrastructures, online erschienen am 16.09.2025. Verfasst von Ali Alsalman und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Ultra-high-performance concrete (UHPC) has greater strength and durability compared to traditional concrete. While these benefits are well established, there are differences in UHPC based on the constituent materials in the mixture. These variations impact the mixtures’ CO2 emissions, efficiency, and cost. Given the contribution of concrete to overall greenhouse gas emissions, it is important to understand the potential impact of UHPC from an environmental standpoint. This study addresses the environmental and economic impact of UHPC by examining five proprietary and five non-proprietary mixtures. The investigation is guided by three research questions, as follows: (1) How do energy consumption, CO2 emissions, and cost compare between proprietary and non-proprietary UHPC mixtures? (2) Which materials are the most influential drivers of these sustainability metrics? (3) Can non-proprietary mixtures provide comparable or better performance in terms of sustainability? Using secondary data from the literature, we calculate and analyze the energy, emissions, and cost of each UHPC constituent. The results indicate that steel fibers account for 53% of the total energy of UHPC. Ordinary Portland cement (OPC) is responsible for 73% of total CO2 emissions. Aggregates, admixtures, and SCMs have a minimal impact on the energy and emissions of the selected mixtures. However, they can affect the cost significantly. To highlight the key findings, non-proprietary mixtures showed substantial sustainability advantages. For example, UHPC-1 achieved up to 65% lower energy consumption, 49% lower CO2 emissions, and 80% lower cost compared to proprietary mixtures. These results highlight the potential of non-proprietary UHPC to serve as an ecologically friendly and cost-effective substitute for infrastructure applications.
Zitieren
APA
Alsalman, A., Assi, L., Carter, K., Mousa, M. A., Dang, C. N., Hale, W. M., & Al-Yousuf, A. (2025). Comparative Sustainability Assessment of Proprietary and Non-Proprietary Ultra-High Performance Concrete Mixtures. Infrastructures, 10(9), 245. https://doi.org/10.3390/infrastructures10090245
Vancouver
Alsalman A, Assi L, Carter K, Mousa MA, Dang CN, Hale WM, et al. Comparative Sustainability Assessment of Proprietary and Non-Proprietary Ultra-High Performance Concrete Mixtures. Infrastructures. 2025;10(9):245. doi:10.3390/infrastructures10090245
BibTeX
@article{Alsalman2025,
author = {Alsalman, Ali and Assi, Lateef and Carter, Kealy and Mousa, Mohammed A. and Dang, Canh N. and Hale, W. Micah and Al-Yousuf, Ayad},
title = {Comparative Sustainability Assessment of Proprietary and Non-Proprietary Ultra-High Performance Concrete Mixtures},
journal = {Infrastructures},
year = {2025},
volume = {10},
number = {9},
pages = {245},
doi = {10.3390/infrastructures10090245}
}
EUVIMED