EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Physics-Informed Modeling of Transient Pulsating Microchannel Flow with Heat-Transfer and Entropy-Generation Trade-Off Analysis

Aswin Karkadakattil

International Journal of Thermofluid Science and Technology · 2026

DOI: 10.3390/ijtst13020007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Thermofluid Science and Technology, 2026. Verfasst von Aswin Karkadakattil. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pulsating flow offers a practical means of modifying convective heat transfer in microchannels, but thermal enhancement may be accompanied by increased thermodynamic irreversibility. This study develops a physics-informed neural network (PINN) framework that couples transient thermo-fluid prediction with concurrent heat-transfer and entropy-generation assessment, rather than considering heat transfer alone. The continuity, momentum, and energy equations are embedded directly into the training process, with residual-based adaptive refinement used to improve solution resolution in high-residual regions. Independent verification of the steady reference solution gives relative discrepancies of 0.04% for the velocity profile against the analytical fully developed parabolic reference, 0.08% for the temperature profile against the finite-difference benchmark, and 3.51% for the downstream Nusselt number against the finite-difference benchmark. For the representative pulsating condition, the phase-resolved Nusselt number decreases from 5.0435 to 4.5413 (9.96%), while total entropy generation increases by 11.16% over the examined phases. The completed 27-case parameter sweep reveals a non-monotonic dependence on pulsation amplitude and frequency, indicating that stronger pulsation does not necessarily produce greater heat-transfer enhancement. Within the investigated parameter space, the condition A=0.2, f=20 Hz, and ϕ1=ϕ2=0.015 gives the highest mean Nusselt number of 7.1126, together with the lowest total entropy generation of 2.7496×10−4 W/K among the evaluated cases. These results demonstrate a physics-constrained framework for jointly evaluating thermal performance and thermodynamic cost, providing a more comprehensive basis for assessing pulsation conditions than heat-transfer enhancement alone.

Zitieren

APA

Karkadakattil, A. (2026). Physics-Informed Modeling of Transient Pulsating Microchannel Flow with Heat-Transfer and Entropy-Generation Trade-Off Analysis. International Journal of Thermofluid Science and Technology. https://doi.org/10.3390/ijtst13020007

Vancouver

Karkadakattil A. Physics-Informed Modeling of Transient Pulsating Microchannel Flow with Heat-Transfer and Entropy-Generation Trade-Off Analysis. International Journal of Thermofluid Science and Technology. 2026. doi:10.3390/ijtst13020007

BibTeX
@article{Karkadakattil2026,
  author = {Karkadakattil, Aswin},
  title = {Physics-Informed Modeling of Transient Pulsating Microchannel Flow with Heat-Transfer and Entropy-Generation Trade-Off Analysis},
  journal = {International Journal of Thermofluid Science and Technology},
  year = {2026},
  doi = {10.3390/ijtst13020007}
}
Kostenlos starten →