EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Leading Edge Bumps for Flow Control in Air-Cooled Condensers

Lorenzo Tieghi, Giovanni Delibra, Johan van der Spuy, Alessandro Corsini

International Journal of Turbomachinery, Propulsion and Power · 09.03.2023 · 8 (1) · 9

DOI: 10.3390/ijtpp8010009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Turbomachinery, Propulsion and Power, online erschienen am 09.03.2023. Verfasst von Lorenzo Tieghi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Air-cooled condensers (ACCs) are commonly found in power plants working with concentrated solar power or in steam power plants operated in regions with limited water availability. In ACCs, the flow of air is driven toward the heat exchangers by axial fans that are characterized by large diameters and operate at very high mass flow rates with a near-zero static pressure rise. Given the overall requirements in steam plants, these fans are subjected to inflow distortions, unstable operations, and are characterized by high noise emissions. Previous studies show that leading edge bumps in the tip region of axial fans can effectively reduce the sound pressure levels without affecting the static efficiency. Nevertheless, the effects of this treatment in terms of flow patterns and heat exchange in the whole ACC system were not investigated. In this work, the effect of leading edge bumps on the flow patterns is analyzed. Two RANS simulations were carried out using OpenFOAM on a simplified model of the air-cooled condenser. The fans are simulated using a frozen rotor approach. Turbulence modeling relies on the RNG k-epsilon model. The fan is characterized by a diameter of 7.3 m and a 333 m3/s volumetric flow rate at the design point. The presence of the heat exchanger is modeled using a porous medium. The comparison between the flow fields clearly exerts that the modified blade is responsible for the redistribution of radial velocities in the rotor region. This drastically reduces the losses related to the installation of the fan in a real configuration.

Zitieren

APA

Tieghi, L., Delibra, G., Spuy, J. V. D., & Corsini, A. (2023). Leading Edge Bumps for Flow Control in Air-Cooled Condensers. International Journal of Turbomachinery, Propulsion and Power, 8(1), 9. https://doi.org/10.3390/ijtpp8010009

Vancouver

Tieghi L, Delibra G, Spuy JVD, Corsini A. Leading Edge Bumps for Flow Control in Air-Cooled Condensers. International Journal of Turbomachinery, Propulsion and Power. 2023;8(1):9. doi:10.3390/ijtpp8010009

BibTeX
@article{Tieghi2023,
  author = {Tieghi, Lorenzo and Delibra, Giovanni and Spuy, Johan van der and Corsini, Alessandro},
  title = {Leading Edge Bumps for Flow Control in Air-Cooled Condensers},
  journal = {International Journal of Turbomachinery, Propulsion and Power},
  year = {2023},
  volume = {8},
  number = {1},
  pages = {9},
  doi = {10.3390/ijtpp8010009}
}
Kostenlos starten →