EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of a Radial Pump Fast Startup and Analysis of the Loop Response Using a Transient 1D Mean Stream Line Based Model

Laura Matteo, Gédéon Mauger, Antoine Dazin, Nicolas Tauveron

International Journal of Turbomachinery, Propulsion and Power · 26.11.2019 · 4 (4) · 38

DOI: 10.3390/ijtpp4040038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Turbomachinery, Propulsion and Power, online erschienen am 26.11.2019. Verfasst von Laura Matteo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Commissariat à l'Énergie Atomique et aux Énergies Alternatives.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A predictive transient two-phase flow rotodynamic pump model has been developed in the Code for Analysis of THermalhydraulics during an Accident of Reactor and safety Evaluation (CATHARE-3). Flow inside parts of the pump (suction, impeller, diffuser and volute) is computed according to a one-dimensional discretisation following a mean flow path. Transient governing equations of the model are solved using an implicit resolution method and integrated along the curvilinear abscissa of the element. This model has been previously qualified at the component scale by comparison to an existing experimental database. The present study aims at extending the validation at the system scale: a whole experimental test loop is modelled. The ability of the transient pump model to predict flow rate, head and torque as a function of time during a 1-s pump fast start-up is evaluated. The transient evolution of the pressure upstream and downstream from the centrifugal pump is well predicted by the simulation compared to the measurements. Local quantities such as pressure and velocity inside elements of the circuit are analysed. In the considered case, inertial effects of the global circuit are dominant when compared to pump inertial effects due to the high characteristic lengths of the pipes. The main perspective of this work consists in the simulation of similar pump transients, in cavitating conditions.

Förderung

  • Commissariat à l'Énergie Atomique et aux Énergies Alternatives

Zitieren

APA

Matteo, L., Mauger, G., Dazin, A., & Tauveron, N. (2019). Simulation of a Radial Pump Fast Startup and Analysis of the Loop Response Using a Transient 1D Mean Stream Line Based Model. International Journal of Turbomachinery, Propulsion and Power, 4(4), 38. https://doi.org/10.3390/ijtpp4040038

Vancouver

Matteo L, Mauger G, Dazin A, Tauveron N. Simulation of a Radial Pump Fast Startup and Analysis of the Loop Response Using a Transient 1D Mean Stream Line Based Model. International Journal of Turbomachinery, Propulsion and Power. 2019;4(4):38. doi:10.3390/ijtpp4040038

BibTeX
@article{Matteo2019,
  author = {Matteo, Laura and Mauger, Gédéon and Dazin, Antoine and Tauveron, Nicolas},
  title = {Simulation of a Radial Pump Fast Startup and Analysis of the Loop Response Using a Transient 1D Mean Stream Line Based Model},
  journal = {International Journal of Turbomachinery, Propulsion and Power},
  year = {2019},
  volume = {4},
  number = {4},
  pages = {38},
  doi = {10.3390/ijtpp4040038}
}
Kostenlos starten →