EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stability Bifurcation in Compressor RANS Simulations Using Body Force Modeling

Emmanuel Benichou, Nicolas Binder, Guillaume Dufour, Yannick Bousquet, Nicolas Poujol, Viviane Ciais, Xavier Flete

International Journal of Turbomachinery, Propulsion and Power · 09.07.2026 · 11 (3) · 32

DOI: 10.3390/ijtpp11030032 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Turbomachinery, Propulsion and Power, online erschienen am 09.07.2026. Verfasst von Emmanuel Benichou und 6 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, GENCI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work points out a stability bifurcation which appears at low mass flow rates when simulating the flow inside of a compressor rotor alone, using the Body Force Modeling (BFM) approach with the Hall–Thollet formulation. This phenomenon is observed for a small propulsive axial fan, with and without model calibration. It does not have any consequence, since it happens far beyond the surge limit of the fan stage and involves “virtual” operating points which cannot be captured with blade simulations. However, this bifurcation also exists with centrifugal impellers, for which a flow recirculation usually takes place at low mass flow rates, enabling extension of the stable operating range. Thus, this represents a serious limitation of this method. This numerical behavior has not yet been documented in the BFM literature. Given the complexity of this subject and the number of parameters, the intention is not to carry out an exhaustive study here. But since the Hall–Thollet formulation is now quite commonly used in turbomachinery CFD, the objective of this work is to briefly report and describe the dichotomy in the solutions obtained.

Förderung

  • Agence Nationale de la Recherche
  • GENCI

Zitieren

APA

Benichou, E., Binder, N., Dufour, G., Bousquet, Y., Poujol, N., Ciais, V., & Flete, X. (2026). Stability Bifurcation in Compressor RANS Simulations Using Body Force Modeling. International Journal of Turbomachinery, Propulsion and Power, 11(3), 32. https://doi.org/10.3390/ijtpp11030032

Vancouver

Benichou E, Binder N, Dufour G, Bousquet Y, Poujol N, Ciais V, et al. Stability Bifurcation in Compressor RANS Simulations Using Body Force Modeling. International Journal of Turbomachinery, Propulsion and Power. 2026;11(3):32. doi:10.3390/ijtpp11030032

BibTeX
@article{Benichou2026,
  author = {Benichou, Emmanuel and Binder, Nicolas and Dufour, Guillaume and Bousquet, Yannick and Poujol, Nicolas and Ciais, Viviane and Flete, Xavier},
  title = {Stability Bifurcation in Compressor RANS Simulations Using Body Force Modeling},
  journal = {International Journal of Turbomachinery, Propulsion and Power},
  year = {2026},
  volume = {11},
  number = {3},
  pages = {32},
  doi = {10.3390/ijtpp11030032}
}
Kostenlos starten →