Pullulan Fatty Ester Nanocoatings with Tunable Surface Wettability and Bio-Inert Surface Properties
International Journal of Molecular Sciences · 2026
DOI: 10.3390/ijms27177768 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2026. Verfasst von Femke De Ceulaer und 4 weiteren Autor:innen. Beteiligte Einrichtung: Chemical and Biochemical Reactor Engineering and Safety (CREaS), Department of Chemical Engineering, Katholieke Universiteit Leuven (KU Leuven), Cele…. Hauptthemen laut MEDLINE: Glucans, Esters, Fatty Acids. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation - Flanders, Research Foundation Flanders.
Abstract (Originalsprache)
Polysaccharide derivatives with tunable hydrophobicity offer a versatile platform for tailoring material properties through controlled chemical modification. In this study, pullulan was functionalized with saturated fatty acids (C14-C18) via N,N-carbonyldiimidazole-mediated esterification, yielding degrees of substitution between 0.24 and 0.77. The effect of alkyl chain length and substitution levels on the thermal, structural, and surface properties of the resulting pullulan esters was systematically investigated. Increasing chain length enhanced thermal stability and promoted structural ordering, with stearate-modified pullulan exhibiting melting transitions at 40–42 °C and higher degradation temperatures (≥312 °C). Spin-coated nanoscale coatings (110–150 nm thick) exhibited extremely smooth surfaces (Sa < 1 nm), although differences in solubility influenced solvent evaporation and induced nanostructural variations. Surface wettability increased systematically with alkyl chain length and degree of substitution, resulting in water contact angles between 85° and 105°. All coatings were non-cytotoxic and inhibited bacterial growth at the interface without leaching, suggesting a contact-dependent antibacterial effect. These results establish clear structure–property relationships in pullulan esters, demonstrating that surface wettability, structural ordering, and surface functionality can be systematically adjusted via alkyl chain length and degree of substitution.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Chemical and Biochemical Reactor Engineering and Safety (CREaS), Department of Chemical Engineering, Katholieke Universiteit Leuven (KU Leuven), Celestijnenlaan 200F, 3001 Leuven, Belgium.
- Laboratory for Soft Matter Physics and Biophysics, Department of Physics and Astronomy, Katholieke Universiteit Leuven (KU Leuven), Celestijnenlaan 200D, P.O. Box 2416, 3001 Leuven, Belgium.
ORCID-Profile: Femke De Ceulaer, Olivier Deschaume, Carmen Bartic
Förderung
- Research Foundation - Flanders
- Research Foundation Flanders
Zitieren
APA
De Ceulaer, F., Chiu, H. C., Deschaume, O., Bartic, C., & Fardim, P. (2026). Pullulan Fatty Ester Nanocoatings with Tunable Surface Wettability and Bio-Inert Surface Properties. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms27177768
Vancouver
De Ceulaer F, Chiu HC, Deschaume O, Bartic C, Fardim P. Pullulan Fatty Ester Nanocoatings with Tunable Surface Wettability and Bio-Inert Surface Properties. International Journal of Molecular Sciences. 2026. doi:10.3390/ijms27177768
BibTeX
@article{DeCeulaer2026,
author = {De Ceulaer, Femke and Chiu, Hao-Chun and Deschaume, Olivier and Bartic, Carmen and Fardim, Pedro},
title = {Pullulan Fatty Ester Nanocoatings with Tunable Surface Wettability and Bio-Inert Surface Properties},
journal = {International Journal of Molecular Sciences},
year = {2026},
doi = {10.3390/ijms27177768}
}
EUVIMED