EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cu-Substituted Sb2S3 Nanopowders—Structural, Microstructural and Optical Analyses

Nikola Ilić iD, Cristian Radu, Amelia Elena Bocirnea, Aurelian Catalin Galca iD, Ivana Validžić iD

International Journal of Molecular Sciences · 19.08.2026 · 27 (16) · 7406

DOI: 10.3390/ijms27167406 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 19.08.2026. Verfasst von Nikola Ilić und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Atomic Physics, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, 11000 Belgra…. Hauptthemen laut MEDLINE: Antimony, Copper, Nanoparticles, Sulfides. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation, European Cooperation in Science and Technology, Ministry of Science, Technological Development and Innovation of the Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu(I)-doped Sb2S3 powders were synthesized using the hot-injection method, with the aim of reducing crystalline particle size and tailoring their morphology to make them more spherical and better suited for spray deposition as an absorber layer in photovoltaic devices. Structural and microstructural analyses confirmed the successful formation of elongated (rod-like) crystalline Sb2S3 particles. CuSbS2, itself a semiconducting material with a high light-absorption coefficient, formed in large amounts in Cu-doped systems, in the form of agglomerates of platelet-like particles. The third abundant phase was an amorphous phase present as spherical nanoparticles composed of uniformly distributed Sb, Cu and S. The presence of Cu decreased Sb2S3 particle size but did not significantly influence its morphology. Chlorides in the synthesis solution enabled faster crystallization than when acetates are the only present anionic species. When Cu, Sb and S sources were added during hot injection in stoichiometric amounts to form CuSbS2, this phase was not reached, and Cu9S5 and Cu12Sb4S13 were the dominant phases, indicating Cu-rich phases have a higher tendency to crystallize in specific conditions with an excess of antimony, and, potentially, sulfur is needed to obtain pure CuSbS2.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AntimonyCopperNanoparticlesSulfidesCrystallizationPowdersParticle Size

Stichwörter der Autor:innen

CuSbS2TEMantimony sulfidemorphologyoptical absorbersstructural analysis

Substanzen

AntimonyCopperPowdersSulfides

Autor:innen und Institutionen

  • Department of Atomic Physics, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, 11000 Belgrade, Serbia.
  • National Institute of Materials Physics, Atomistilor 405A, 077125 Magurele, Romania.

ORCID-Profile: Nikola Ilić, Aurelian Catalin Galca, Ivana Validžić

Förderung

  • Ministry of Science, Technological Development and Innovation
  • European Cooperation in Science and Technology
  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia
  • Romanian National Authority for Research
  • UEFISCDI
  • COST
  • Renew-PV

Zitieren

APA

Ilić, N., Radu, C., Bocirnea, A. E., Catalin Galca, A., & Validžić, I. (2026). Cu-Substituted Sb2S3 Nanopowders—Structural, Microstructural and Optical Analyses. International Journal of Molecular Sciences, 27(16), 7406. https://doi.org/10.3390/ijms27167406

Vancouver

Ilić N, Radu C, Bocirnea AE, Catalin Galca A, Validžić I. Cu-Substituted Sb2S3 Nanopowders—Structural, Microstructural and Optical Analyses. International Journal of Molecular Sciences. 2026;27(16):7406. doi:10.3390/ijms27167406

BibTeX
@article{Ili2026,
  author = {Ilić, Nikola and Radu, Cristian and Bocirnea, Amelia Elena and Catalin Galca, Aurelian and Validžić, Ivana},
  title = {Cu-Substituted Sb2S3 Nanopowders—Structural, Microstructural and Optical Analyses},
  journal = {International Journal of Molecular Sciences},
  year = {2026},
  volume = {27},
  number = {16},
  pages = {7406},
  doi = {10.3390/ijms27167406}
}
Kostenlos starten →