EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Nanoclay Modification and Environmental Exposure on the Mechanical and Surface Properties of Polyester Composites

Dominik Stępka, Magdalena Bańkosz iD, Karina Rusin-Żurek iD, Dagmara Słota iD, Karina Niziołek iD, Kinga Setlak iD, Katarzyna Haraźna iD, Josef Jampilek iD, Agnieszka Sobczak-Kupiec iD

International Journal of Molecular Sciences · 2026

DOI: 10.3390/ijms27146199 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2026. Verfasst von Dominik Stępka und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science, CUT Doctoral School, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawła II…. Hauptthemen laut MEDLINE: Polyesters, Clay, Nanocomposites. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents the results of a study investigating the influence of surface-modified montmorillonite nanoclay and environmental exposure on the mechanical and surface properties of composites based on orthophthalic unsaturated polyester resin. A series of samples containing 0.02 to 0.1 wt.% of nanoclay, as well as a reference sample, were prepared. Following synthesis, the samples were incubated for one week in aqueous solutions with pH values of 4, 7, and 9. Mechanical testing included tensile strength, flexural strength, impact resistance, and surface roughness (Ra). Additionally, fracture surface analysis was performed using scanning electron microscopy (SEM) and digital optical microscopy. The effect of the additive on hardness was also assessed, and Fourier transform infrared (FT-IR) spectroscopy was carried out. The results indicated that nanoclay addition increased the material’s stiffness (Young’s modulus), although higher filler concentrations led to decreased impact strength and flexural performance, likely due to particle agglomeration. Incubation in chemically aggressive environments caused mechanical degradation and significant increases in surface roughness, especially after exposure to neutral and alkaline media. Microscopic observations confirmed the presence of microstructural changes and nanoclay agglomerates in selected samples. The findings confirm that the effectiveness of nanoclay modification depends not only on concentration but also on dispersion quality and the environmental conditions to which the material is exposed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersClayNanocompositesSurface PropertiesBentoniteTensile StrengthMaterials TestingSpectroscopy, Fourier Transform Infrared

Stichwörter der Autor:innen

compositesmontmorillonitenanoclaypolyester resin

Substanzen

PolyestersClayBentonite

Autor:innen und Institutionen

  • Department of Materials Science, CUT Doctoral School, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawła II Av., 31-864 Krakow, Poland.
  • Department of Materials Science, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawła II Av., 31-864 Krakow, Poland.
  • Department of Analytical Chemistry, Faculty of Natural Sciences, Comenius University, Ilkovicova 6, 842 15 Bratislava, Slovakia.
  • Department of Chemical Biology, Faculty of Science, Palacky University, Slechtitelu 27, 779 00 Olomouc, Czech Republic.

ORCID-Profile: Magdalena Bańkosz, Karina Rusin-Żurek, Dagmara Słota, Karina Niziołek, Kinga Setlak, Katarzyna Haraźna, Josef Jampilek, Agnieszka Sobczak-Kupiec

Förderung

  • Polish Ministry of Science and Higher Education

Zitieren

APA

Stępka, D., Bańkosz, M., Rusin-Żurek, K., Słota, D., Niziołek, K., Setlak, K., Haraźna, K., Jampilek, J., & Sobczak-Kupiec, A. (2026). Effect of Nanoclay Modification and Environmental Exposure on the Mechanical and Surface Properties of Polyester Composites. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms27146199

Vancouver

Stępka D, Bańkosz M, Rusin-Żurek K, Słota D, Niziołek K, Setlak K, et al. Effect of Nanoclay Modification and Environmental Exposure on the Mechanical and Surface Properties of Polyester Composites. International Journal of Molecular Sciences. 2026. doi:10.3390/ijms27146199

BibTeX
@article{Stpka2026,
  author = {Stępka, Dominik and Bańkosz, Magdalena and Rusin-Żurek, Karina and Słota, Dagmara and Niziołek, Karina and Setlak, Kinga and Haraźna, Katarzyna and Jampilek, Josef and Sobczak-Kupiec, Agnieszka},
  title = {Effect of Nanoclay Modification and Environmental Exposure on the Mechanical and Surface Properties of Polyester Composites},
  journal = {International Journal of Molecular Sciences},
  year = {2026},
  doi = {10.3390/ijms27146199}
}
Kostenlos starten →