EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Anodic Bonding Performance of (PEG)10LiClO4/NaAlOSiO Solid Electrolyte for Packaging

Chao Du iD, Yali Zhao

International Journal of Molecular Sciences · 26.04.2026 · 27 (9) · 3837

DOI: 10.3390/ijms27093837 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 26.04.2026. Verfasst von Chao Du und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Jinzhong University, Jinzhong 030619, China. Hauptthemen laut MEDLINE: Polyethylene Glycols, Zeolites. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation for Young Scientists of Shanxi Province, Scientific Research Project of the "Young Talents" Support Program of Jinzhong University, Scientific Research Project of the “Young Talents” Support Program of Jinzhong University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a polyethylene glycol (PEG)-based solid electrolyte composite (PEG)10LiClO4/NaAlOSiO suitable for anodic bonding packaging was successfully fabricated via a combined ball milling and hot pressing process. The micromorphology, ion transport characteristics, and mechanical packaging properties of the composite were systematically investigated using characterization techniques including electrochemical impedance spectroscopy, X-ray diffraction, scanning electron microscopy, and anodic bonding performance tests. The results demonstrate that doping with NaAlOSiO molecular sieve can effectively reduce the crystallinity of the polymer matrix, construct more efficient carrier transport pathways, and simultaneously enhance the ionic conductivity and mechanical properties of the material. When the mass fraction of NaAlOSiO doping is 8 wt.%, the composite exhibits a room temperature ionic conductivity of up to 1.31 × 10−5 S·cm−1. Under room temperature and a bonding voltage of 800 V, the sample with this doping ratio achieves the optimal anodic bonding with metallic Al, and the tensile strength of the bonding interface reaches 5.93 MPa, showing excellent application prospects in micro–nano-packaging.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polyethylene GlycolsZeolitesElectrodesProduct PackagingMaterials TestingElectric Conductivity

Stichwörter der Autor:innen

PEGanodic bondingelectronic packagingsolid electrolytetensile properties

Substanzen

Polyethylene GlycolsZeolites

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Jinzhong University, Jinzhong 030619, China.

ORCID-Profile: Chao Du

Förderung

  • Natural Science Foundation for Young Scientists of Shanxi Province
  • Scientific Research Project of the "Young Talents" Support Program of Jinzhong University
  • Scientific Research Project of the “Young Talents” Support Program of Jinzhong University

Zitieren

APA

Du, C., & Zhao, Y. (2026). Preparation and Anodic Bonding Performance of (PEG)10LiClO4/NaAlOSiO Solid Electrolyte for Packaging. International Journal of Molecular Sciences, 27(9), 3837. https://doi.org/10.3390/ijms27093837

Vancouver

Du C, Zhao Y. Preparation and Anodic Bonding Performance of (PEG)10LiClO4/NaAlOSiO Solid Electrolyte for Packaging. International Journal of Molecular Sciences. 2026;27(9):3837. doi:10.3390/ijms27093837

BibTeX
@article{Du2026,
  author = {Du, Chao and Zhao, Yali},
  title = {Preparation and Anodic Bonding Performance of (PEG)10LiClO4/NaAlOSiO Solid Electrolyte for Packaging},
  journal = {International Journal of Molecular Sciences},
  year = {2026},
  volume = {27},
  number = {9},
  pages = {3837},
  doi = {10.3390/ijms27093837}
}
Kostenlos starten →