EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Controlling the Mixing Sequence of the Reactive Compatibilizer SAN-g-Epoxy in PBT/ABS Blends: Enhancing Mechanical and Thermomechanical Performance Through Interfacial Engineering

Carlos Bruno Barreto Luna iD, Eduardo da Silva Barbosa Ferreira iD, Edson Antonio Dos Santos Filho iD, Fabiano Santana da Silva, José Vinícius Melo Barreto iD, Danilo Diniz Siqueira, Renate Maria Ramos Wellen iD, Edcleide Maria Araújo

International Journal of Molecular Sciences · 08.04.2026 · 27 (8) · 3343

DOI: 10.3390/ijms27083343 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 08.04.2026. Verfasst von Carlos Bruno Barreto Luna und 7 weiteren Autor:innen. Beteiligte Einrichtung: Laboratório de Processamento de Polímeros, Unidade Acadêmica de Engenharia de Materiais, Universidade Federal de Campina Grande, Campina Grande 58429…. Hauptthemen laut MEDLINE: Polyesters, Butadienes, Polystyrenes, Styrene. Die Arbeit nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeicoamento de Pessoal de Nível Superior, National Council for Scientific and Technological Development, CNPq.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer blends constitute a strategy for tailoring the properties of commercial polymers, leading to the development of materials designed for specific applications. In this work, the effect of the mixing sequence of the reactive compatibilizer styrene–acrylonitrile functionalized with epoxy groups (SAN-g-Epoxy) on the performance of poly(butylene terephthalate) (PBT)/acrylonitrile–butadiene–styrene (ABS) blends was investigated. PBT/ABS blends (60/40 wt%) were prepared by reactive extrusion in a twin-screw extruder followed by injection molding, incorporating five parts per hundred resin (phr) of SAN-g-Epoxy through different mixing sequences, aiming to understand how the processing order influences interfacial reactions, morphology, and the final properties of the material. The results indicated that SAN-g-Epoxy promotes reactive compatibilization between PBT and ABS, as evidenced by a significant increase in torque and complex viscosity, as well as by an increase in the intensity of the carbonyl band in the Fourier transform infrared spectroscopy (FTIR) spectra. By scanning electron microscopy (SEM), the presence of the compatibilizer resulted in a pronounced morphological refinement of the dispersed ABS phase, reducing the average particle size from approximately 4.34 µm to about 0.47–0.54 µm. Among the processing strategies, the route (PBT/SAN-g-Epoxy) + ABS exhibited the best mechanical performance under impact, reaching 206.7 J/m. However, the simultaneous mixing sequence PBT/ABS/SAN-g-Epoxy showed the best balance of properties, with gains of 203% in impact strength, 8.8% in elastic modulus, and 40.1% in heat deflection temperature (HDT) compared to neat PBT. The results indicate that PBT can be improved and tailored for engineering applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersButadienesPolystyrenesStyrenePolymersAcrylonitrileEpoxy ResinsSpectroscopy, Fourier Transform InfraredTemperatureViscosityMaterials TestingAcrylic Resins

Stichwörter der Autor:innen

ABSPBTperformancepolymer blendsreactive compatibilization

Substanzen

PolyestersButadienesPolystyrenespoly(1,4-butylene terephthalate)ABS resinStyrenePolymersAcrylonitrileEpoxy ResinsAcrylic Resins

Autor:innen und Institutionen

  • Laboratório de Processamento de Polímeros, Unidade Acadêmica de Engenharia de Materiais, Universidade Federal de Campina Grande, Campina Grande 58429-900, PB, Brazil.
  • MackGraphe, Mackenzie Institute for Research in Graphene and Nanotechnologies, São Paulo 01302-907, SP, Brazil.
  • Department of Materials Engineering, Federal University of Paraíba, Cidade Universitária, João Pessoa 58051-900, PB, Brazil.

ORCID-Profile: Carlos Bruno Barreto Luna, Eduardo da Silva Barbosa Ferreira, Edson Antonio Dos Santos Filho, José Vinícius Melo Barreto, Renate Maria Ramos Wellen

Förderung

  • Coordenação de Aperfeicoamento de Pessoal de Nível Superior
  • National Council for Scientific and Technological Development
  • CNPq
  • CAPES

Zitieren

APA

Luna, C. B. B., Ferreira, E. D. S. B., Dos Santos Filho, E. A., da Silva, F. S., Barreto, J. V. M., Siqueira, D. D., Wellen, R. M. R., & Araújo, E. M. (2026). Controlling the Mixing Sequence of the Reactive Compatibilizer SAN-g-Epoxy in PBT/ABS Blends: Enhancing Mechanical and Thermomechanical Performance Through Interfacial Engineering. International Journal of Molecular Sciences, 27(8), 3343. https://doi.org/10.3390/ijms27083343

Vancouver

Luna CBB, Ferreira EDSB, Dos Santos Filho EA, da Silva FS, Barreto JVM, Siqueira DD, et al. Controlling the Mixing Sequence of the Reactive Compatibilizer SAN-g-Epoxy in PBT/ABS Blends: Enhancing Mechanical and Thermomechanical Performance Through Interfacial Engineering. International Journal of Molecular Sciences. 2026;27(8):3343. doi:10.3390/ijms27083343

BibTeX
@article{Luna2026,
  author = {Luna, Carlos Bruno Barreto and Ferreira, Eduardo da Silva Barbosa and Dos Santos Filho, Edson Antonio and da Silva, Fabiano Santana and Barreto, José Vinícius Melo and Siqueira, Danilo Diniz and Wellen, Renate Maria Ramos and Araújo, Edcleide Maria},
  title = {Controlling the Mixing Sequence of the Reactive Compatibilizer SAN-g-Epoxy in PBT/ABS Blends: Enhancing Mechanical and Thermomechanical Performance Through Interfacial Engineering},
  journal = {International Journal of Molecular Sciences},
  year = {2026},
  volume = {27},
  number = {8},
  pages = {3343},
  doi = {10.3390/ijms27083343}
}
Kostenlos starten →